Schlüter®-DITRA 25 - NBS National BIM Library

Schlüter®-DITRA 25

Units 3-5
Bardon 22
Beveridge Lane
Coalville
Leicestershire
LE67 1TE

Tel +44 (0)1530 813396

Schlüter®-DITRA 25

Designed for tile and natural stone installations, Schlüter®-DITRA 25 serves as a waterproofing membrane, a vapour pressure equalisation layer to accommodate moisture occurring at the underside of the substrate and an uncoupling layer for problematic substrates.

The substrate must be even and load bearing. To bond Schlüter®-DITRA 25, use a bonding adhesive that is appropriate for the substrate. Apply the adhesive using
a 3 x 3 mm or 4 x 4 mm notched trowel.

The anchoring fleece on the underside of Schlüter®-DITRA 25 must be fully engaged in the adhesive to provide a mechanical bond to the substrate. Please observe the open time of the bonding adhesive.

Using the thin-bed method and following all applicable industry standards, set the tile or stone covering directly on the Schlüter®- DITRA 25 in such a way that the tile adhesive becomes mechanically anchored in the square, cut back cavities of the Schlüter®- DITRA 25 matting.

Tags:
Platform Compatible Version Certified to
IFC IFC - 1 1.3
Revit Revit 2016 + 1 1.3

Download

Units 3-5
Bardon 22
Beveridge Lane
Coalville
Leicestershire
LE67 1TE

Tel +44 (0)1530 813396

  • Properties and values
  • More information
  • More BIM objects

Properties and values

COBie
NBS_General
NBS_Data
EnvironmentalProductDeclaration
n/a
Form
Vacuum formed
PerformanceAntistaticProperties
n/a
PerformanceElongationToBreak
n/a
PerformanceResistantToUndergroundGases
n/a
PerformanceTearResistance
n/a
PerformanceTensileStrengthMinimum
n/a
PerformanceUVStabilization
n/a
PerformanceWaterVapourResistanceMinimum
µ = 875000
PhysicalPropertiesDimensionsRollLengthMinimumOptions
5 m, 30 m
PhysicalPropertiesWeightMinimum
565 g/m²
Purpose
Water resistance
RecycledContent
n/a
RootInhibitor
n/a
ThirdPartyCertification
CE Compliance
Pset_CoveringCommon

More information

  • NBS specification data
  • More BIM objects