NBS National BIM Library

Polysafe Vogue Ultra PUR Safety Flooring

Polysafe Vogue Ultra PUR Safety Flooring

PO Box 3
Radcliffe New Road
Whitefield
Manchester
M45 7NR

Tel +44 (0)161 767 1122

Need specialist advice?
Get technical help
 

Polysafe Vogue Ultra PUR Safety Flooring

Polysafe Vogue Ultra PUR is a safety flooring range featuring 16 colours with a multi-chip decoration. The product incorporates Polysafe PUR, a high quality, cross-linked polyurethane reinforcement, UV cured to provide superior cleaning benefits, optimum appearance retention and life cycle cost savings when compared to untreated safety floors. Polysafe Vogue Ultra PUR incorporates coloured quartz, aluminium oxide, silicon carbide particles and natural recycled aggregates in the vinyl to provide sustainable wet slip resistance for the guaranteed life of the product.

The floor covering conforms to a wide range of international standards including the European Norm for Safety Flooring EN 13845 and is fully compliant with Health and Safety Executive and UK Slip Resistance Group Guidelines, achieving a low slip potential classification. A result of 36+ is achieved on the RRL Pendulum Wet Test using Four-S/Slider 96 rubber with a surface roughness of 20 microns +.

Vogue Ultra meets the 50 000 cycles abrasion test to EN 13845, meaning the product provides sustainable slip resistance. The product is resistant to dilute acids and alkalis and is classified as anti-static in accordance with EN 1815.

Polysafe Vogue Ultra PUR achieves a BRE Global Environmental A+ Rating (Certificate No: ENP 472) in major use areas such as education and healthcare. The product is also 100% recyclable and contains recycled material.

Platform Compatible Version Certified to
IFC IFC 2X3 1 1.3
Revit Revit 2015 + 1 1.3

Download

PO Box 3
Radcliffe New Road
Whitefield
Manchester
M45 7NR

Tel +44 (0)161 767 1122

Need specialist advice?
Get technical help
 
  • Properties and values
  • More information
  • More BIM objects

Properties and values

COBie
NBS_General
NBS_Data
AbrasionWearRating
50,000 cycles (BS EN 13845), Group T (BS EN 649)
AgBBCertification
Pass
AlcoBasedHandGels
Compatible for use with the most commonly used alco-based hand gels
Applications
Public, institutional & commercial buildings
ApprovedFactory
n/a
BREEAMRating
(ENP 472) A+ Rating in major use areas such as education and healthcare
CastorChairRating
Suitable
CastorChairSuitability
Pass
CEMark
Fully CE Marked
ChemicalResistance
Good resistance to dilute acids and alkalis. Chemical resistance charts by shade are available on request
ColourAndPattern
Particle Based Safety Flooring
ColourOptions
18
DeclarationOfPerformance
No formaldehyde or formaldehyde containing materials are used in the manufacture of Polyflor vinyl flooring ranges. Therefore according to the requirements of EN14041:2004 they need not be classified, but may, without any testing, be declared as E1
DimensionalStability
0.4% (maximum)
ElectricalBehaviour
EN 1815 < 2kV
EurofinsCertification
n/a
FLECTest
n/a
Flexibility
n/a
FloorScoreCertification
SCS-FS-02034
GreenStarIEQ-VOC
Compliant
GreenTagCertification
GreenRate level A - Gold Plus
LEED
Could contribute to LEED credits, MR Credit 2.1 or 2.2 (Construction Waste Management) and 5.1 or 5.2 (Regional Materials) and IEQ Credit 4.3 (Low Emitting Materials, carpet systems)
LightfastnessRating
ISO 105-B02 Method 3 ≥6
LightReflectanceValues
BS 8300: 2009 - available at www.polyflor.com
MaritimeUsage
n/a
Patent
n/a
PatentApplication
n/a
ProductGuidance
Weld Rods available for each shade. Decoration/shade may vary from sample shown. Polish must not be applied. Install using Polyflor guidelines. Can be welded to coved skirtings for impervious surface. Floor accessories available. Use recommended cleaning procedures & approved products, suitable for steam cleaning
REACH
Product contains no hazardous substance and is REACH compliant
Recofloor
The flooring can be recycled through the Recofloor Vinyl Take Back Scheme of which Polyflor is a founding and funding member
Recyclability
1
RecycledContent
0.02
Reinforcement
Polyurethane
ResidualIndentation
<0.1 mm
ResponsibleSourcing
Very Good (BES 6001)
SlipResistance
RRL Pendulum Test 36 (wet test - 4S Rubber/Slider 96)
SlipResistanceRating
ESf (BS EN 13845), R10 (DIN 51130), R10 (AS 4586), 36+ Pendulum Wet Test (Slider 96)
Standard
General Particle Based Safety Flooring Performance Standard EN 13845
SurfaceRoughness
Rz 20μm
ThermalConductivity
Suitable for underfloor heating (maximum 27ºC)
UnderfootComfort
n/a
UseClass
23,34,43
VOCEmissions
AgBB VOC test: Pass, GBCA/NZGBC Green Star IEQ-VOC: Compliant
WearLayer
n/a
Weight
2400g/m²
Pset_CoveringCommon
Pset_CoveringFlooring

More information

  • NBS specification data
  • More BIM objects

    Terms and conditions

    Please agree to the updated terms and conditions

    Thank you, your registration was complete
    Thank you
    Your query has been sent.

    A technical consultant from will be in touch soon.
    Manufacturers using NBS National BIM Library adhere to our code of conduct.