NBS Source
I'm a manufacturer
Compare variants

Newton HydroBond 403 Plus - Pre-Applied External Waterproofing Membrane for Basement Waterproofing and Gas Protection - Waterproofing Membrane & Gas Barrier

Verified by manufacturer 3 months ago

Newton 403 HydroBond (HB)

Newton Waterproofing Systems Variant:
Third party certifications:
  • KIWA BDA

    KIWA BDA

    Certificate type

Pre-applied external and self-healing Type A waterproofing membrane for all below ground and earth-retained structures from domestic basements to the largest civil engineering projects.

Jump to:
BOS
+44 (0)1732 360095 Website

Application

HydroBond 403 Plus is for use as a continuous membrane to permanent raft and wall formwork such as the raft blinding and piled walls of reinforced concrete earth-retained structures, including:


  • Existing structures;
  • Secant or contiguous concrete piles;
  • Metal sheet piles;
  • Diaphragm walls;
  • King post walls;
  • Sufficiently stable ground (such as clay or chalk);
  • Temporary timber shuttering/ formwork.

403 HydroBond is placed to formwork ready for the placement of concrete. For concrete rafts and slabs, the membranes are fitted above a sound and uniform support such as a concrete blinding or compacted hardcore.

When installed to walls, 403 HydroBond is fitted to sound and uniform permanent formwork such as existing walls or faced-off piles.

Description

Newton 403 HydroBond® is a high performance, self-healing, composite sheet membrane, available in two variants, with Newton HydroBond-GB adding ground gas resistance (in compliance with BS 8485:2015) as well as the exceptional waterproofing capabilities of the standard membrane. When fitted above the raft support or to wall formwork, the membrane locking fleece is fully encapsulated into the newly placed concrete, becoming fully-engaged to prevent water tracking. If the waterproof LDPE layer is punctured, the exposed hydrophilic coating expands, preventing water ingress, effectively sealing small holes that may be accidentally formed during fixing of the reinforcing steel or the placing and compaction of the concrete.

Newton 403 HydroBond provides a complete waterproof envelope to the structure to achieve Type A (barrier) waterproofing suitable for Grades 1, 2 and 3 as defined by BS 8102:2009, and is suitable for all below ground and earth-retained structures from domestic basements to the largest civil engineering projects. Both variants can be used as part of the HydroBond® System in conjunction with Newton 108 HydroBond-LM, which is sprayed to the exposed walls of the basement after the temporary formwork is removed. Where space is tight, Newton HydroBond 109-LM can be applied by roller or brush or small airless spray machine.

Newton 403 HydroBond can be used alongside other Newton products to provide a co-ordinated and combined approach to the waterproofing of the whole structure that includes protection against water ingress to the deck, through construction joints, through and around service entries and to movement joints. Correctly protected, the Newton HydroBond System will provide, under normal service conditions, a durable waterproof barrier for the life of the building to which it is installed; the expected lifetime of the building itself should be at least 60 years. The Newton HydroBond system is supported by BDA Agrément Certificate BAB 17-031/04/A and is accepted by the NHBC as a suitable waterproofing system for Type A Waterproofing to Grades 1, 2 & 3 according to BS 8102:2009.


KEY BENEFITS

• Agrément certificated and NHBC accepted waterproofing system • Full mechanical bond to concrete prevents water migration between membrane and structure

• Hydrophilic layer provides self-healing of punctures to the membrane

• Very flexible - Resistant to movement and fissures in substrates

• The HydroBond System completely encapsulates the structure

• Excellent resistance to the high alkalinity of concrete

• Third-party test certification for radon, carbon dioxide and hydrocarbon gases


TYPICAL APPLICATIONS

As a continuous membrane to permanent raft and wall formwork such as the raft blinding and piled walls of reinforced concrete earth-retained structures.


SUITABLE SUBSTRATE

RAFT OR SLAB

• Concrete blinding

• Compacted type 1 hardcore

• Compacted sand

The following can be placed above the blinding or hardcore prior to the installation of 403 HydroBond:

• Void former

• Clay heave board

• Closed-cell flooring grade insulation

• Newton 410 GeoDrain

WALL FORMWORK

• Existing structure

• Secant or contiguous concrete piles

• Metal sheet piles

• Diaphragm walls

• King post wall

• Sufficiently stable ground such as clay or chalk

• Temporary timber shuttering/formwork

General information

Color

White

Blue

Finish

Smooth

Material

Composite

Guidance for specification option:

Composite low-density polyethylene (LDPE)

Shape

Other

Guidance for specification option:

Sheet membrane form

Length

20000 mm

Width

1000 mm

Height

1.60 mm

Warranty description

60 year

Uniclass

Pr_25_57_65_60 Plastics sheetsPrimary

CAWS

J40/297 Waterproofing/ damp-proofing/ gas-retardant membrane

Product range

External Waterproofing and Drainage Membranes

Specification data - Plastics sheets

Material

Low-density polyethylene (PE-LD).

Standard

CE marked, and manufactured in accordance with BS EN 13967: 2012.

Performance characteristics

-

Tensile strength (minimum)

>250 N/50 mm Machine.

>200 N/50 mm Transverse.

Tear resistance

>150 N.

Elongation to break

20% Machine.

50% Transverse.

Resistant to underground gases

Carbon dioxide/ methane.

Water vapour resistance (minimum)

340 MNs/g.

Fire performance

Euroclass E (BS EN 13501-1).

Third-party certification

BDA Cert - BAB 14-031/02/A. Third-party test certified for radon, carbon dioxide and hydrocarbon gases. Agrément certificated and National House Building Council (NHBC) accepted waterproofing system.

Form

Externally applied waterproofing membrane.

Physical properties

-

Colour

White/ Dark Blue.

Weight (minimum)

24.3 kg.

Dimensions

-

Thickness (minimum)

1.60 mm.

Width (minimum)

1 m.

Roll length (minimum)

20.00 x 1.00 m.

Top

Consult manufacturer's literature for relevant surface preparation and protection.

Underside

Consult manufacturer's literature for relevant surface preparation and protection.

Density

1.215 g/m².

Shelf life

12 months.

Application temperature

-10°C to +40°C.

Service temperature

-40°C to +100°C.

Adhesion to concrete

0.4 N/mm².

Resistance to static loading - 20kg load

Watertight.

Resistance to impact - Al plate - 200mm drop

Watertight.

Resistance to impact – EPS panel - 500 mm drop

Watertight.

Resistance to impact – AI plate - 250 mm drop

N/A.

Resistance to impact – EPS panel - 1750 mm drop

N/A.

Joint strength - Glued seam

>100 N/50 mm.

Water vapour diffusion resistance - Sd value

68 m.

Water vapour diffusion resistance – µ value

42500 µ.

Water tightness - 2 kPa for 24 h

Watertight.

Water tightness - 400 kPa for 72 h

Watertight.

Resistance against chemicals - 23°C for 12 weeks

Watertight.

Resistance against chemicals - 2 kPa for 28 days

Watertight.

CO2 gas diffusion resistance

Not tested.

CO2 permeability – Membrane

Not tested.

CO2 permeability – Joint

Not tested.

CO2 permeability – Combined Average

Not tested.

Radon gas diffusion resistance – Membrane

Not tested.

Radon gas diffusion resistance – Joint

Not tested.

Methane permeability – Membrane

Not tested.

Methane permeability – Joint

Not tested.

Methane permeability – Combined Average

Not tested.

Durability against thermal ageing - 70°C for 12 weeks

Not tested.

Durability against thermal ageing - 2 kPa for 24 hours

Watertight.

Compatibility with Bitumen - 70°C / 28 days

Not tested.

Compatibility with Bitumen - 2 kPa / 24 hours

Watertight.

Swelling capacity at 20°C - Linear

28%.

Swelling capacity at 20°C - By volume

111%.

Swelling capacity at 5°C - Linear

12%.

Swelling capacity at 5°C - By volume

39%.

Accessories/ Other requirements

Guidance for specification option:

Consult manufacturer's literature and insert requirements.

Sustainability data

Contains Red List materials

No

Country of material origin

Germany

Country of product manufacture

Germany

Recyclability

0

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

0 %

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
IFC

IFC2X3

2

Revit

Revit 2016

5

Third party certifications

KIWA BDA

KIWA BDA

Newton HydroBond 403 - KIWA BDA Certificate

Literature

Newton HydroBond 403 Plus BDA Certificate

Newton HydroBond 403 Plus BDA Certificate

Case studies

Waterproofing a Basement Office, London

Waterproofing a Basement Office, London

Similar products from Newton Waterproofing Systems

1200 Gauge Damp Proof Membrane Newton DampSafe 802-DPM - 1200 Gauge Damp Proof Membrane

1200 Gauge Damp Proof Membrane Newton DampSafe 802-DPM - 1200 Gauge Damp Proof Membrane

Below-Ground External Waterproofing Membrane and Ground Level Damp Proof Membrane - Newton HydroBond 402-CSSM

Below-Ground External Waterproofing Membrane and Ground Level Damp Proof Membrane - Newton HydroBond 402-CSSM

External Waterproofing & Gas Membrane Newton HydroBond SAGM - Self Adhesive Membrane

External Waterproofing & Gas Membrane Newton HydroBond SAGM - Self Adhesive Membrane

Puncture Resistant Root Barrier Membrane Newton NewSeal 409 To Eliminate Root Penetration - Puncture Resistant Root Barrier Membrane

Puncture Resistant Root Barrier Membrane Newton NewSeal 409 To Eliminate Root Penetration - Puncture Resistant Root Barrier Membrane

Self-Adhesive, Post-Applied Waterproofing Membrane - Newton HydroBond SA

Self-Adhesive, Post-Applied Waterproofing Membrane - Newton HydroBond SA