We have thousands of BIM objects from a variety of manufacturers so take a look now.
Providing consistency to BIM objects and a Standard that will transform BIM for the entire construction industry.
Assuring the consistency, quality and compatibility of BIM objects.
Showing 1-36 of 6243 Show more results per page
Two-component, transparent epoxy primer in water
Extruded sintered polystyrene insulating panels for thermal insulation systems.
Self-adhesive, waterproofing membrane for use beneath tiles.
Solvent and NMP-free, odourless, water-based binder, mixed with wood flour filler, for grouting wooden floors. Suitable for Ultracoat water-based varnishing cycles and Ultracoat OIL.
High-density, glass wool insulating panels for thermal insulation systems.
Fascia fixed, frameless aluminium balustrade system with off-set fixing position capable of achieving UDL loads up to 3KN. Variants in glass specification are required to achieve varying loads.
High performance, reinforced, loose laid, damp-proof membrane.
Quick-setting, fibre-reinforced, compensated-shrinkage, thixotropic cementitious mortar for repairing and smoothing concrete, applied in various thicknesses from 3-40 mm in a single layer.
Single component, solvent-free polyurethane adhesive with a very low emission level of volatile organic compounds for bonding pre-finished, multi-layered parquet.
Rapid setting, low dust, single component, flexible lightweight S1 wall and floor tile adhesive. It is non-slip and suitable for ceramic, porcelain and natural stone tiles and mosaics.
High performance, polymeric DPC.
Sulphate-resistant thixotropic fibre-reinforced mortar for the repair of concrete. It can be used to repair damaged concrete surfaces such as balconies and corners of columns and beams.
Easyflush is a hands-free and water-conserving WC cistern flush and fill valve, suitable for concealed or exposed cisterns.
Ready-to-use flexible liquid membrane with fibres for continuous waterproofing layers on exposed external surfaces.
Acrylic sealant in water dispersion for wooden floors.
Single component, isocyanate and solvent-free, sililated polymer-based adhesive with extremely low emissions of VOC, for all types of parquet.
Three-component polyurethane/cement-based mortar for making covings and details.
Solvent-free, carpet tile tackifier dispersed in water, for the non-permanent installation of carpet tiles. Allows the replacement of carpet tiles as and when required. Low emissions of VOC.
Single component, high-performance, highly-deformable, lightweight, rapid-setting and hydrating cementitious adhesive.
Two-component, single coat application, damp proof membrane for controlling residual and constructional moisture in cementitious substrates.
Amtico Spacia stone is available in a finish of either ceramic, deep ceramic or riven.
A polyurethane and cement-based formula, with high mechanical strength and excellent resistance to chemicals.
Three-component, high-strength, easy-to-apply, polyurethane-cement mortar with high resistance to chemicals. For coating industrial floors in layers from 6-9 mm thick.
Single component trowellable fine-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.
A Premium EPS insulated render system with a silicone finish.
SIDERISE CW-FB is a high performance curtain wall fireboard for use in façade assemblies that require enhanced fire resistance performance, used in conjunction with SIDERISE CW-FS.
Medium strength (40 MPa) thixotropic mortar for the repair of concrete. It can be used to repair damaged concrete surfaces such as balconies and corners of columns and beams.
Direct Flush is an infrared sensor controlled urinal valve.
High quality polyethylene foam certified to BS EN ISO 717/2 which achieves 19 dB at 3 mm thickness and 22 dB at 5 mm (ratings may vary dependent on the adhesive applied).
Resin-based, cold applied, waterproof coating system.
Quick-setting, light-grey coloured fine mortar for repairing and smoothing concrete and render.
Mode 3 single socketed IEC 62196 (Type 2) wall mounted chargepoint. The chargepoint has a number of parametric values for power output and number of phases.
Multi-purpose HT acrylic adhesive, dispersed in water, solvent-free with very low emissions of VOC. For bonding vinyl, rubber, PVC and carpet.
Phenolic pipe supports
Cistermiser’s Sensazone system controls the water supply, lighting and extractor fans within the washroom.
Trade levelling and smoothing compound, protein-free with low odour and high compressive strength.
Tell us who you would like to see BIM objects from or what objects you would like
Your query has been sent.
A technical consultant from will be in touch soon.
Manufacturers using NBS National BIM Library adhere to our code of conduct.