Flowchem EPN System - NBS National BIM Library

Flowchem EPN System

The Flooring Technology Centre
Booth Lane
Moston
Sandbach
Cheshire
CW11 3QF

Tel +44 (0)1270 753000

Flowchem EPN System

A two-component Novolac epoxy resin coating system offering protection against a wide range of highly concentrated acids, bases and solvents.

It is able to retain its mechanical properties at high temperatures and when exposed to wet conditions. As a result of the material’s increased crosslink density, Flowcoat EPN is recommended for applications where high temperature, wear and chemical resistance properties are required.

Tags:
Platform Compatible Version Certified to
IFC IFC - 1 1.3
Revit Revit 2015 + 1 1.3

Download

The Flooring Technology Centre
Booth Lane
Moston
Sandbach
Cheshire
CW11 3QF

Tel +44 (0)1270 753000

  • Properties and values
  • More BIM objects

Properties and values

IFC
IfcExportAs
IfcCoveringType
IfcExportType
FLOORING
COBie
NBS_General
NBS_Data
Application
Roller
BarcolHardness
n/a
BondStrength
>3 N/mm²
Certification
BS 8204-6
CoefficientOfThermalExpansion
n/a
ColourOptions
Grey (RAL 7040)
CompressiveStrength
n/a
CureTime
Tack-free: 4-6 hours, full traffic: 1 day, full chemical cure: 7 days
Density
n/a
ElongationAtBreak
n/a
FinishOptions
Gloss
FlexuralStrength
68 N/mm²
Grout
n/a
ImpactResistance
n/a
LevellingScreed
If required
Membrane
n/a
ModulusOfElasticity
6897 N/mm²
MovementJointsAttachment
n/a
MovementJointsType
n/a
Primer
Flowprime (porous substrates only)
Reinforcement
n/a
ResinFlooring
Flowchem EPN (FeRFA type 3)
ResinSkirtingsAndUpstands
n/a
SlipResistance
Dry >40 low slip potential
SubstratePreparation
Shot blasted
SubstrateTesting
Moisture content of substrates dry to 75% RH
SurfaceHardness
85-90 Shore D
SurfaceTreatment
Various grades of quartz, aluminium oxide, glass spheres or silicon carbide can be incorporated for a textured surface
SystemAccessories
n/a
TemperatureResistance
<>
TensileStrength
27 N/mm²
ThermalConductivity
n/a
ThicknessOptions
0.6 mm
Toxicity
n/a
Uses
Secondary containment areas, concrete pads and pedestals, splash and spill areas, applications where high temperature, wear and chemical resistance properties are required
VapourPermeability
n/a
WaterPermeability
n/a
WearResistance
0.12 g max. weight loss (CS-17 wheel)
Pset_CoveringCommon
Pset_CoveringFlooring

More BIM objects