Fire detection and alarm systems consist of control and indicating equipment, detection devices, manual call points, and visual/ audible alarms.
An addressable loop powered Base Sounder with integral Beacon, innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dB(A) with low current consumption.
A Dual Input Module with an integral short-circuit isolator, designed to interface to inputs such as door contacts, sprinkler flow equipment etc. Available as a DIN Rail mountable version.
A Dual Relay Controller designed to provide two general-purpose relay outputs, each output can be driven separately for control of devices such as dampers, plant and equipment shutdown.
A Dual Sounder Controller, which has been designed to provide two sounder outputs that can be driven separately with full fault monitoring.
A Dual Circuit Zone Controller designed to allow up to 60 conventional detectors (30 on each zone) to be interfaced to Hochiki’s ESP analogue addressable system.
An addressable heat sensor incorporating a Variable Temperature heat element and a Rate Of Rise heat element, both of which are controlled from the Fire Control Panel.
An addressable loop-powered ceiling beacon, with a high intensity LED and a custom designed free-form optic which produces a highly visible flash which complies with EN54-23 for visual alarm devices.
An addressable loop-powered wall beacon, with a high intensity LED and a custom designed free-form optic which produces a highly visible flash which complies with EN54-23 for visual alarm devices.
An addressable loop powered Wall Sounder Beacon innovatively designed to provide a range of tones and volumes with a maximum output of up to 102dB(A) (±2dB(A)) with low current consumption.
A Manual Call Point with integral short-circuit isolator, which is fully compatible with Hochiki’s ESP analogue addressable protocol.
Tell us who you would like to see BIM objects from or what objects you would like to see.