To embed this BIM object onto your website, simply copy and paste the HTML code below.
<iframe src="https://www.nationalbimlibrary.com/en/syndicationgeneration/iframesingle/?objectId=250011" frameborder="0" width="225" height="285"></iframe>
The object content is configured for use in UK, but it may also be suitable for use in other locations.
EasyClick is the fast way to fit composite decking. The design means no separate fixings are needed, just press the boards down into the specially designed clips to fit. No piercing of the upper surface of the boards mean no splinters. Extruded 25 mm thick by 140 mm wide Duro Excellence composite decking boards. Duro Excellence is a compound made from recycled rice husks & PVC with no wood content, designed to be mildew, insect and moisture resistant. Fire rating Euroclass B. Slip resistant and fully recyclable. Rice husk is a waste product which is usually burnt, so CO2 savings are achieved by reusing it as a decking product.
The boards are extruded with grooves on the underside to connect to the iDeck clips on the rails. The 15 mm x 62 mm aluminium rails are fitted with specially designed iDeck EasyClick fixing clips preinstalled at the correct spacing to connect to the boards along their length. iDeck EasyClick fixing clips are manufactured from nylon and carry worldwide design patents.Tthey are designed with dart shaped clips facing up so that they are pressed into the grooves on the underside of the Duro Excellence deckboards so the edge of two Duro Excellence boards are held into each clip. The clips allow for thermal expansion across the width of the board. A Clips allow all board to run in one direction, B Clips allow for perpendicular decking patterns and changes of direction. No screws through the upper surface of the boards mean no splinters and no risk of screws working loose over time through movement. No risk of clips coming away due to expansion movement. Shaped, extruded step profiles click into EasyClick clips for deck edging and staircases.
Framing profiles can be cut to size and mechanically fixed to edges or details to fill voids. Framing profile can be heated and bend to shape for curves. iJack fittings maintain consistent joint between each deckboard so boards do not touch and lift. Boards expand in unison and gaps stay consistent and boards will not “travel”, expand and contract in the same direction causing instability.
EasyClick also available in tropical hardwood including ipe, thermo ash, teak and thermo bamboo. EasyClick is suitable for both decking and cladding
||Teak, Terra, Moor Oak, Denim|
||Decking system available in various materials and finishes|
||Super fast and super easy installation using aluminium rails and deckboards with pre-measured fittings and clips. Zero top fittings through deckboards. Low maintenance, extremely stable and durable, can be treated and/or stained as you like, no splinters, weatherproof and waterproof, UV ray resistant, isect and termite proof|
||12/31/1900 11:59:59 PM|
||iDecking Easy Click|
||140 x 25 x 2800 mm|
||100% recyclable material. Its primary component, rice husk, is a renewable source which can be replaced in a shorter cycle than wood|
||12/31/1900 11:59:59 PM|
||DURO Excellence clickable step profile; framing profile; flexible framing profile|
||Included on rails|
||Duro: ca 1280 kg/ m³|
||Structural frame required mounted onto posts concreted into ground; or concrete deck|
||Fasteners included with aluminium rails|
||Concrete deck - RAIL SYSTEM of adjustable pedestal PLUS aluminium joist, plus A rail and deckboard to create flat level if required|
||2 x Auminium rails make up subframe, 1st rail fixed to pedestal, 2nd rail mechanically fitted to 1st rail in perpendicular formation|
||Duro (25 x 70 or 10 x 90 mm)|
||Duro: 35.1 N/mm²|
||Duro: 015 W/mK|
||Recycled rice husk and virgin fibre PVC|
Manufacturer data change.
Object upgraded to NBS BIM Object Standard v2.0.
Changes to reflect updates to the NBS BIM Object Standard v1.3
Objects have also been updated to Revit 2015
Your query has been sent.
A technical consultant from will be in touch soon.
Manufacturers using NBS National BIM Library adhere to our code of conduct.
The creation of BIM objects for the inclusion on the National BIM Library includes Omniclass classification codes and titles.
Copyright © 2014 the secretariat for the OmniClass Development Committee. All Rights Reserved. http://www.omniclass.org/