To embed this BIM object onto your website, simply copy and paste the HTML code below.
<iframe src="https://www.nationalbimlibrary.com/en/syndicationgeneration/iframesingle/?objectId=250010" frameborder="0" width="225" height="285"></iframe>
The object content is configured for use in UK, but it may also be suitable for use in other locations.
EasyChange is an alternative to fit Duro Excellence composite decking and allowing boards to be removed at any point in the future. The system is comprehensive boards-and-fixings design so no separate fixings are needed. No piercing of the upper surface of the boards mean no splinters. Extruded 25 mm thick by 140 mm wide Duro Excellence composite decking boards. Duro Excellence is a compound made from recycled rice husks & PVC with no wood content, designed to be mildew, insect and moisture resistant. Fire rating Euroclass B. Slip resistant and fully recyclable. Rice husk is a waste product which is usually burnt, so CO2 savings are achieved by reusing it as a decking product.
The boards are extruded with special ridges on the sides to fit into special mobile clips which are pre-fitted onto aluminium rails. The iDeck EasyChange fixing clips are manufactured from nylon and carry worldwide design patents. The boards are installed between the clips perpendicular to the rails and the clips are turned using the special EasyKey to lock the boards in place. There is a 6 mm gap between each board once installed. Each board can be removed by turning the EasyKey along the length of the board, releasing it and future-proofing the deck beneath for any inspection or maintenance. No screws pass through the upper surface of the boards mean no splinters and no risk of screws working loose over time through movement. No risk of clips coming away due to expansion movement. Special end clips can be installed at the end of runs to secure the edge of the final deck board.
Framing profile can be heated and bent to shape for curves. iJack fittings maintain consistent joint between each deckboard so boards do not touch and lift. Boards expand in unison and gaps stay consistent and boards will not “travel”, expand and contract in the same direction causing instability.
EasyChange also available in tropical hardwood including ipe, thermo ash, teak and thermo bamboo. EasyChange can be used for cladding as well as decking and is ideal for covering areas such drains, electrical cables or service hatches.
||Etherno: CE and FSC environmentally certified product|
||Teak, Terra, Moor Oak, Denim|
||Decking system available in various materials and finishes|
||Low maintenance, extremely stable and durable, can be treated and/or stained as you like, no splinters, weatherproof and waterproof, UV ray resistant, isect and termite proof|
||12/31/1900 11:59:59 PM|
||iDecking Easy Change|
||Duro: 140 x 25 x 2800 mm|
||Duro: 100% recyclable material. Its primary component, rice husk, is a renewable source which can be replaced in a shorter cycle than wood, Etherno: 100% manufactured of Bamboo which grows much faster than any tree and is among, the most prolific resources on earth|
||12/31/1900 11:59:59 PM|
||DURO Excellence framing profile; flexible framing profile. End clip|
||Included on rails|
||Duro: ca 1280 kg/ m³|
||Structural frame required mounted onto posts concreted into ground; or concrete deck|
||Fasteners included with aluminium rails|
||Concrete deck - RAIL SYSTEM of adjustable pedestal PLUS aluminium joist, plus A rail and deckboard to create flat level if required|
||2 x Auminium rails make up subframe, 1st rail fixed to pedestal, 2nd rail mechanically fitted to 1st rail in perpendicular formation|
||Duro (25 x 70 or 10 x 90 mm)|
||Duro: 35.1 N/mm²|
||Duro: 015 W/mK|
||Recycled rice husk and virgin fibre PVC|
Manufacturer data change.
Object upgraded to NBS BIM Object Standard v2.0.
Changes to reflect updates to the NBS BIM Object Standard v1.3
Objects have also been updated to Revit 2015
Your query has been sent.
A technical consultant from will be in touch soon.
Manufacturers using NBS National BIM Library adhere to our code of conduct.
The creation of BIM objects for the inclusion on the National BIM Library includes Omniclass classification codes and titles.
Copyright © 2014 the secretariat for the OmniClass Development Committee. All Rights Reserved. http://www.omniclass.org/