EPDM Through Wall Outlets

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Preformed shape for use with roof outlets up to parapets, gutters and through wall drainage holes. Flexible, tough EPDM shape is inserted into drainage hole and bonded and / or mechanically fixed to the waterproofing membrane in a sandwich application.

Outlet shape is placed onto the rubber waterproofing and bonded using adhesive and / mechanically fixed. A patch of waterproofing is installed above the outlet flange and fully bonded completely over the top to ensure area is watertight.

Drainage outlet is protected by having additional layer and fully sealed.

Platform Compatible Version Certified to
IFC IFC - 1 2.1
Revit Revit 2017 + 1 2.1

  • Properties and values
  • More BIM objects

Properties and values

IFC
IfcExportAs
IfcWasteTerminalType
IfcExportType
NOTDEFINED
COBie
BOS_General
NBS_Data
HeightOfOutletDrainageHole
65 mm
HeightOfTheBorderFlap
160 mm
InstallationGuidance
Bonded to bituminous membranes in a sandwich technique where unit is heat bonded with hot air (no direct flame) to allow liquid bituminous membrane to become tacky and ooze through perforations to bond to second layer, can also be fitted using mechanical fix or bond using solvent adhesive - always prime both outlet and surface with solvent based primer
IntegralAccessories
Gravel excluder, leaf guard
LengthOfShankOrOutletPipe
425 mm
WidthOfFlange
340 mm
WidthOfOutletDrainageHole
100 mm
WidthOfTheBorderFlap
150 mm

More BIM objects