EPDM Downpipe Outlets (Smooth Flange)

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Preformed shape for use with downpipes drainage holes on flat roofs. Manufactured with smooth flange. Flexible, tough EPDM shape is inserted into drainage hole and bonded and / or mechanically fixed to the waterproofing membrane in a sandwich application.

Outlet shape is placed onto the rubber waterproofing and bonded using adhesive and / or mechanical fixings. A patch of waterproofing is installed above the outlet flange and fully bonded completely over the top to ensure area is watertight.

Drainage outlet is protected by having additional layer and fully sealed. A round leaf guard should be inserted into top of hole once installed. Always prime both the outlet shape and the waterproofing membrane before installation.

Platform Compatible Version Certified to
IFC IFC - 1 2.1
Revit Revit 2017 + 1 2.1

  • Properties and values
  • More BIM objects

Properties and values

IFC
IfcExportAs
IfcWasteTerminalType
IfcExportType
NOTDEFINED
COBie
BOS_General
NBS_Data
InnerDiameterOfThePipeAtTheBottom
24 mm
InnerDiameterOfThePipeAtTheTop
26 mm
InstallationGuidance
Bonded to bituminous membranes in a sandwich technique where unit is heat bonded with hot air (no direct flame) to allow liquid bituminous membrane to become tacky and ooze through perforations to bond to second layer, can also be fitted using mechanical fix or bond using solvent adhesive - always prime both outlet and surface with solvent based primer
IntegralAccessories
Gravel excluder, leaf guard
OuterDiameterOfTheFlangeOrSurroundingRing
235 mm
OuterDiameterOfThePipeAtTheTop
n/a
OuterDiameterOfTheWellAtTheTop
31 mm
PipeHeight
240 mm

More BIM objects