Cetus Safe - Panel

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Tubular frame steel mesh UX 550 panel system - is the most heavy-duty of our panel systems. Special profiles are used for installation to prevent even the slightest chance of prying the wall sections apart. The system is tested and approved in-line with pre-standard EN1627-30. Troax UX 550 is primarily used as a front wall where extra security is needed. UX 550 is compatible with UR 350 and UX 450 for inner walls. Troax modular mesh panel systems makes it possible to create separate storage areas in virtually any common space. The 50x50 mesh aperture also makes it virtually impossible for a hand to reach through the panel and the seven different panel widths provides versatility to configure secure areas to meet most applications. Available in powder coated and hot-dip galvanised finishes. There are two installation methods UX 550 using strong profiles at the panel joints and UX 500 using brackets and self-drill screws on the inside of the enclosure.

Platform Compatible Version Certified to
IFC IFC 2X3 2 1.3
Revit Revit 2016 + 3 2.0

  • Properties and values
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
Accessories
Cut profile, END profile UR/UX, U-profile UX to give versatility of on-site installation
AdditionalApertures
Normally cut on site - flexible rubber capping can be provided to cap cut wires, alternatively cut outs can be pre-cut or cut and welded prior to delivery
Applications
Storage spaces - commercial, domestic, industrial, military
CableManagementAndOutlets
Cable trays can be provided as an option
CeilingJointTreatment
Connected using brackets and self-drill screws from the inside
CeilingMethodOfSupport
Self supported on the vertical wall panels and posts, up to 3000mm span thereafter support provided using 'C' section beams
CeilingPanels
The same panels can be used to form a roof over the enclosures
CeilingType
Mesh panels
DeflectionAllowanceMaximumFloor
n/a
DeflectionAllowanceMaximumHead
n/a
DeflectionAllowanceMaximumVerticals
n/a
DoorArrangementDoorFrames
See door options
DoorArrangementDoorLeafsType
See door options
DoorArrangementDoorLeafsVisionPanels
n/a
DoorArrangementType
See door options
FrameFixing
n/a
FrameSize
Tubular frame - UX 550 welded mesh panels: 30 x 20 x 1 .25mm
FramingJunctionsCorners
A largely boltless system using special profile junctions and brackets fixed by self-drill screws on the inside to give an externally tamper proof finish
GlazedPanelsAdditionalFeatures
n/a
GlazedPanelsIntegralBlinds
n/a
GlazedPanelsType
n/a
Hardware
n/a
HeightOptions
2200mm only infill above if required uses the same panels horizontally fixed to ceiling supports
MeshSizeOptions
UX 550 welded mesh - 50 x 50mm (5.0 x 5.0mm wire) only
PanelPartitionTypeOptions
See frame and mesh options
PerimetersSkirtingsSills
n/a
PostSize
n/a
Seals
n/a
SolidPanelsColourOptions
Grey - RAL 7037 & Hot-Dip Galvanised, other RAL colours by special order
SolidPanelsCoreOptions
n/a
SolidPanelsFinishOptions
n/a
SolidPanelsThickness
Frame - UX: 30mm
SolidPanelsType
Carbon steel tubular frame with fully welded mesh face
ThirdPartyAccreditation
Swedish Theft Prevention Association (SSF) Approval
Trims
U' Profile can be used to cap the panels, provided in a pre-galv or painted to match the panel finish
Weight
UX 550 - 8.7kg - 17.0kgs/m² depending on panel width
WidthOptions
200mm, 300mm, 700mm, 800mm, 1000mm, 1200mm, 1500mm
Pset_WallCommon

More BIM objects

What's Changed?

8/16/2018

Object upgraded to NBS BIM Object Standard v2.0.

1/19/2017