Cetus Medium - Panel

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Tubular frame steel mesh UX 450 panel system - is a medium-duty, system that is suitable for creating storage cages and enclosures, suitable for storage areas with already reasonable outer protection. The 50 x 50mm mesh aperture makes it difficult for a hand to reach through the panel and the eight different widths provides versatility to configure secure areas to meet most applications. The system is largely boltless being secured from the inside using plates and self drilling screws. Available in powder coated and hot-dip galvanised finishes. Cetus Classic UR 350 panels can also be used for the internal dividing walls.

Platform Compatible Version Certified to
IFC IFC 2X3 2 1.3
Revit Revit 2016 + 3 2.0

  • Properties and values
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
Accessories
Cut profile, END profile UR/UX, U-profile UX, to give versatility of on-site installation
AdditionalApertures
Normally cut on site - flexible rubber capping can be provided to cap cut wires, alternatively cut outs can be pre-cut or cut and welded prior to delivery
Applications
Storage spaces - commercial, domestic, industrial, military
CableManagementAndOutlets
Cable trays can be provided as an option
CeilingJointTreatment
Connected using brackets and self-drill screws from the inside
CeilingMethodOfSupport
Self supported on the vertical wall panels and posts, up to 3000mm span thereafter support provided using 'C' section beams
CeilingPanels
The same panels can be used to form a roof over the enclosures
CeilingType
Mesh panels
DeflectionAllowanceMaximumFloor
n/a
DeflectionAllowanceMaximumHead
n/a
DeflectionAllowanceMaximumVerticals
n/a
DoorArrangementDoorFrames
See door options
DoorArrangementDoorLeafsType
See door options
DoorArrangementDoorLeafsVisionPanels
n/a
DoorArrangementType
See door options
FrameFixing
n/a
FrameSize
Tubular frame - UX450 welded mesh panels: 30 x 20 x 1 .25mm
FramingJunctionsCorners
A largely boltless system using brackets fixed by self-drill screws on the inside to give an externally tamper proof finish
GlazedPanelsAdditionalFeatures
n/a
GlazedPanelsIntegralBlinds
n/a
GlazedPanelsType
n/a
Hardware
n/a
HeightOptions
2200mm only infill above if required uses the same panels horizontally fixed to ceiling supports
MeshSizeOptions
UX 450 welded mesh - 50 x 50mm (3.0 x 3.75mm wire) only
PanelPartitionTypeOptions
See frame and mesh options
PerimetersSkirtingsSills
n/a
PostSize
n/a
Seals
n/a
SolidPanelsColourOptions
Grey - RAL 7037 & Hot-Dip Galvanised, other RAL colours by special order
SolidPanelsCoreOptions
n/a
SolidPanelsFinishOptions
n/a
SolidPanelsThickness
Frame - UX: 30mm
SolidPanelsType
Carbon steel tubular frame with fully welded mesh face
ThirdPartyAccreditation
n/a
Trims
U' Profile can be used to cap the panels, provided in a pre-galv or painted to match the panel finish
Weight
UX 450 - 5.09kg - 11.8kgs/m² depending on panel width
WidthOptions
200mm, 300mm, 500mm, 700mm, 800mm, 1000mm, 1200mm, 1500mm
Pset_WallCommon

More BIM objects

What's Changed?

8/16/2018

Object upgraded to NBS BIM Object Standard v2.0.

1/19/2017