Caelum - Panel

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Tubular frame steel mesh panels - are available in eight widths and two heights, panels can be joined in height using connecting tubes in combinations of the 2200mm & 800mm panel heights to meet the requirements. If the required height cannot be reached they can be cut and capped on site using special profile sections or cut and welded prior to delivery. A range of fixing options including posts, post extensions, floor feet and corner brackets make a versatile system to meet most partitioning needs. The Troax UX 450, UR 325 and UR 350 modular industrial mesh wall panel systems create fencing partitions, storage cages, enclosures and dividing walls. The UX tube frames are 30mm x 20mm and the UR tube frames are 19mm x 19mm. Available in powder coated and hot-dip galvanised finishes.

Platform Compatible Version Certified to
IFC IFC 2X3 2 1.3
Revit Revit 2016 + 3 2.0

  • Properties and values
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
Accessories
Corner bracket, Cut profile, END profile UR/UX, Extension bracket, Floor fixing UR, U-profile UR, Roof fixing UR/UX, to give versatility of on-site installation
AdditionalApertures
Normally cut on site - flexible rubber capping can be provided to cap cut wires, alternatively cut outs can be pre-cut or cut and welded prior to delivery
Applications
Industrial storage, enclosures, cages, partitions
CableManagementAndOutlets
Cable trays can be provided as an option
CeilingJointTreatment
Panels are bolted together with strengthening joint section
CeilingMethodOfSupport
Self supported on the vertical wall panels and posts, up to 3000mm span thereafter support provided using 'C' section beams
CeilingPanels
The same panels can be used to form a roof over the enclosures
CeilingType
Mesh panels
DeflectionAllowanceMaximumFloor
n/a
DeflectionAllowanceMaximumHead
n/a
DeflectionAllowanceMaximumVerticals
n/a
DoorArrangementDoorFrames
See door options
DoorArrangementDoorLeafsType
See door options
DoorArrangementDoorLeafsVisionPanels
n/a
DoorArrangementType
See door options
FrameFixing
n/a
FrameSize
Tubular frame - UR 300, UR 325 and UR 350 welded mesh panels: 19 x 19 x 1.0mm, UX 450 welded mesh panel: 30 x 20 x 1.25mm
FramingJunctionsCorners
Bolted joints, through post clamps at post positions, through in-line floor feet with spacer washers above at interim joints, 90° corner brackets can be easily bent to form other angles
GlazedPanelsAdditionalFeatures
n/a
GlazedPanelsIntegralBlinds
n/a
GlazedPanelsType
n/a
Hardware
n/a
HeightOptions
2200mm & 800mm (for UR 350 and UX 450 welded mesh panels only) can be used in combination of multiple lifts to reach required heights with connecting tubes fitting inside the tubular frame
MeshSizeOptions
UR 325 welded mesh panel: 25 x 25mm (2.5 x 2.5mm wire), UR 350 welded mesh panel: 50 x 50mm (2.5 x 2.5mm wire), UX 450 welded mesh panel: 50 x 50mm (3.0 x 3.75mm wire)
PanelPartitionTypeOptions
See frame and mesh options
PerimetersSkirtingsSills
n/a
PostSize
60 x 40 x 1.5mm - Offset, does not add any dimension to the partition
Seals
n/a
SolidPanelsColourOptions
Grey - RAL 7037 & Hot-Dip Galvanised, other RAL colours by special order
SolidPanelsCoreOptions
n/a
SolidPanelsFinishOptions
n/a
SolidPanelsThickness
Frame - UX: 30mm, UR 19mm
SolidPanelsType
Carbon steel tubular frame with fully welded mesh face
ThirdPartyAccreditation
n/a
Trims
U' Profile can be used to cap the panels, provided in a pre-galv or painted to match the panel finish
Weight
UR 350 - 2.9kg - 7.0kg/m², UR 325 - 4.4kg - 7.2kg/m², UX 450 - 5.09kg - 11.8kgs/m² depending on panel width
WidthOptions
200mm, 300mm, 500mm, 700mm, 800mm, 1000mm, 1200mm, 1500mm
Pset_WallCommon

More BIM objects

What's Changed?

8/16/2018

Object upgraded to NBS BIM Object Standard v2.0.

1/19/2017