Superglass Superwall is a British Board of Agrément (BBA) approved, non-combustible and water repellent glass mineral wool insulation cavity wall batt. The fl exible batt is supplied at 455mm wide to allow easy installation between standard vertical wall tie spacings and minimum on-site cutting and waste.

Features and benefits:

• Manufactured in accordance with ISO 14001 – Environmental Management Systems.
• Generic BRE Green Guide Rating of A+.
• BRE Global verified Environmental Product Declaration (EPD).
• Manufactured from up to 84% recycled glass which would otherwise go to landfill.
• UKCA and CE marked to BS EN 13162:2012+A1:2015.
• Lightweight, flexible, and easy to install.
• Thermal Conductivities: 0.032W/mK, 0.034W/mK, and 0.036W/mK
• BBA certified for all UK exposure zones - Certificate number 89/2231.
• Suitable for full-fill and partial fill cavity walls.

Water resistance

Constructions incorporating the product and built in accordance with the Standards listed in section 4.4 of BBA Certificate 89/2231 Product Sheet 3, will resist the transfer of precipitation to the inner leaf and satisfy the national Building Regulations. 

Fire performance

All Superglass products are deemed non-combustible and have a fire classification of A1 (the highest possible rating) when tested to BS EN 13501-1 Reaction to Fire.

Durability

All Superglass products are non-hygroscopic, will not rot, degrade or sustain vermin and will not encourage the growth of mould, bacteria or fungi.

Vapour resistance

All Superglass products offer negligible vapour resistance allowing vapour to pass freely through the insulation.

Platform	Compatible	Version	Certified to
Revit	-	1	-