Select regional version:
The object content is configured for use in UK, but it may also be suitable for use in other locations.
The VECTASAFE dead weight anchor ensures a protection for 1 person against falls from height. it allows securing the users during maintenance works on a dry or wet roof, with an asphalt, PVC or EPDM coating. It remains the optimum solution when is it technically impossible to fi x on the exiting support. This freestanding system avoids drilling the roof membrane. Its conception allows a simple and quick installation by preserving the roof watertightness. This anchor is ideal on fl at surfaces of which the slope is lower than or equal to 5°. It must be installed at 2500 mm from the roof edge.
| Platform | Compatible | Version | Certified to |
|---|---|---|---|
IFC
|
- | 1 | 2.1 |
Revit
|
- | 1 | 2.1 |
| IfcExportAs |
|
IfcElementComponentType |
| IfcExportType |
|
USERDEFINED |
| AnchorType |
|
Dead weight anchor |
| Application |
|
Indoor or outdoor |
| Counterweight |
|
500 kg |
| DrillingDepth |
|
n/a |
| Fixing |
|
Assembly to support legs by the stepped pin and clips pin |
| MaximumUsers |
|
One maximum at any one time |
| Options |
|
n/a |
| Resistance |
|
n/a |
| Weight |
|
12.5 kg |
