Webertherm XM FMR018P External Wall Insulation

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

A high performance external wall insulation system protected by meshcloth reinforced polymer renders.

When applied to a masonry substrate, webertherm XM systems have BBA approval covering various types of insulation and many render finishes.

Features and benefits:

  • Provides efficient insulation for refurbishment and new build projects.
  • A variety of insulation options including EPS, PHS and MFD.
  • Comprehensive range of colours and textures enable the creation of striking visual effects.
  • Dry dash - weberend PTC + decorative aggregates
  • Synthetic finishes available in a range of 160 colours
  • Rendered brick effect - weberwall brick.
  • Has a high performance water shedding range of finishes to protect the building fabric.
  • Low K-value insulants allow thinner insulation to be used or higher standards to be achieved.
  • Reduces interstitial condensation by creating a 'warm wall' construction.
  • BBA approved certificate no. 91/2691.
  • NSAI approved certifications 06/0260 and 09/0338.
Platform Compatible Version Certified to
IFC IFC - 1 2.1
Revit Revit - 1 2.1

  • Properties and values
  • More BIM objects

Properties and values

COBie
BOS_General
NBS_Data
BeadsAndTrims
n/a
Considerations
Do not apply if frost is forecast within 24 hours of use, in damp/wet conditions, in temperatures below 5°C or above 30°C, on elevations in direct sunlight or where the substrate is hot
Constraints
The quality of application of these materials depends on suitable operative skills and product familiarity, restrictions on weather conditions during application and curing must be respected, sound trade practices and printed instructions must be followed, good access and appropriate protection must be provided
Density
15 kg/m³
FireBarriersAndStopsFixings
Stainless Steel
FireBarriersAndStopsMaterial
MFD
Fixing
Mechanical
HeavyDityMeshDimensions
5.5 x 5.5 mm
HeavyDutyRollSize
1m x 25m roll
HeavyDutyWeight
480 g/m²
InsulationAdditionalMechanicalFixings
n/a
InsulationAdhesive
weberend LAC rapid
InsulationMaterial
MFD
Meshcloth
Balanced, open weave, alkaline resistant glass fibre meshcloth
MovementJointsAccessories
n/a
MovementJointsFormWith
n/a
MovementJointsSealant
n/a
Preparation
n/a
ProtectiveCoating
n/a
Reinforcement
Meshcloth
RenderApplication
n/a
RenderCarrierOrReinforcementFixings
n/a
RenderCarrierOrReinforcementMaterial
n/a
RenderCarrierOrReinforcementMeshSize
n/a
RenderColour
160 Colours available
RenderDecorativeFinish
weberplast TF
RenderMaterial
weberend LAC rapid
SamplesRequired
n/a
StandardDutyMeshDimensions
3.5 x 3.5 mm
StandardDutyRollSize
1m x 50m roll
StandardDutyWeight
160 g/m²
SystemAccessories
n/a
SystemManufacturer
Saint-Gobain Weber
ThicknessRange
57.5-207.5mm
Uses
Facilitates the decoration and remodelling of existing, tired facades, simplifies wall construction within the new build sector
Pset_CoveringCommon

More BIM objects