weberset SPF

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

A high-strength, low dust single-part adhesive for fixing low porosity tiles or when limited movement or vibration is expected, e.g. under floor heating, over boarded wooden floors.

Exceeds the requirements of BS EN 12004 for CF2T-S1.

Can be primed with PR360.

Constraints:

Not recommended for fixing directly onto tongued and grooved timber floors.

Preparation:

  • Surfaces to be clean, dry, sound and free from dust, grease or any other contamination.
  • Substrates to be capable of supporting the weight of tiling.
  • Make good any unsound areas and remove weak or friable material.

Bedding:

Solid bed adhesive for use on wall/ floor tiling.

Platform Compatible Version Certified to
IFC IFC - 1 2.1
Revit Revit - 1 2.1

  • Properties and values
  • More BIM objects

Properties and values

COBie
BOS_General
NBS_Data
Application
Walls and floors, interior and exterior, heated screeds, overboarded wooden floors, low porosity tiles or substrates, tiling onto existing tiles
Colour
Light grey, white
Considerations
If using tiles with resin backs, instead use weberset plus mixed with weber AD250 admixture
Coverage
9 kg/m² (solid bed, 6 mm thick), 4.5 kg/m² (solid bed, 3 mm thick), 3.0 kg/m² (using a notched trowel with 6 x 6 mm, notches at 12 mm centres
OpenTime
10 minutes
ParticleSize
Up to approx. 0.5 mm
PotLife
30 minutes
SetTime
2 hours ȓ light foot traffic, full load after 24 hours
TemperatureResistance
ȓ10°C to 100°C and frost resistant when set
ThicknessRange
3 - 6 mm
WaterAddition
5 litres per 20 kg for use as a pourable adhesive, 4 litres per 20 kg for normal floor tiling, 3.4 litres per 20 kg for non-slip wall tiling
Pset_CoveringCommon

More BIM objects