weberset rapid plus

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

An adhesive for fixing fully vitrified tiles or tiles onto impervious solid surfaces which exceeds the requirements of BS EN 12004 for C2FT.

Constraints:

Not recommended for fixing:

  • Where limited movement is expected.

Preparation:

  • Surfaces to be clean, dry, sound and free from dust, grease or any other contamination.
  • Substrates to be capable of supporting the weight of tiling.
  • Make good any unsound areas and remove weak or friable material.

Bedding:

Solid thick bed adhesive for use on floor tiling.

Platform Compatible Version Certified to
IFC IFC - 1 2.1
Revit Revit - 1 2.1

  • Properties and values
  • More BIM objects

Properties and values

COBie
BOS_General
NBS_Data
Application
Walls and floors, interior and exterior situations, heated floors, low porosity tiles or substrates, power-floated screeds, tiling onto existing tiles
Colour
Grey and white
Considerations
If fixing tiles onto wooden substrates, add weber AD250 admixture first, if fixing tiles with resin backs, instead use weberset plus mixed with weber AD250 admixture
Coverage
9 kg/m² (solid bed, 6 mm thick), 4.5 kg/m² (solid bed, 3 mm thick), 3.0 kg/m² (using a notched trowel with 6 x 6 mm, notches at 12 mm centres),
OpenTime
10 minutes
ParticleSize
Up to approx. 0.5 mm
PotLife
30 minutes
SetTime
2 hours
TemperatureResistance
ȓ10 to 100°C and frost resistant when set
ThicknessRange
3 - 6 mm
WaterAddition
4.4 litres per 20 kg for floor tiling, 3.8 litres per 20 kg for non-slip wall tiling
Pset_CoveringCommon

More BIM objects