weberset plus

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

A standard-setting cement-based polymer-modified non-slip adhesive for fixing porcelain, ceramic, quarry, terrazzo and terracotta tiles and natural stone to rigid interior and exterior floors and walls. The product is suitable for low porosity substrates such as power floated concrete or existing tiles, exceeds the requirements of BS EN 12004 for C2T and can be primed with PR360.

Constraints:

Weber AD250 admixture is required when fixing tiles to wooden substrates. Not recommended for tiles with resin backs.

Preparation:

  • Ensure that all surfaces are clean, dry, sound and free from dust, grease or any contaminating barrier.
  • Make good any unsound areas and remove flaky or peeling layers before tiling.
  • Porous or dusty surfaces should be primed with Weber PR360 and allowed to dry before tiling.
  • Check before use that the colour of the adhesive does not cause staining or discolouration of light coloured or translucent tiles.
Platform Compatible Version Certified to
IFC IFC - 1 2.1
Revit Revit - 1 2.1

  • Properties and values
  • More BIM objects

Properties and values

COBie
BOS_General
NBS_Data
Application
Walls and floors, interior and exterior situations, heated floors, low porosity tiles or substrates, power-floated screeds, tiling onto existing tiles
Colour
Grey and white
Considerations
If fixing tiles onto wooden substrates, add weber AD250 admixture first, if fixing tiles with resin backs, add weber AD250 admixture first
Coverage
9 kg/m² (solid bed, 6 mm thick), 4.5 kg/m² (solid bed, 3 mm thick), 3.0 kg/m² (using a notched trowel with 6 x 6 mm, notches at 12 mm centres
OpenTime
20 minutes
ParticleSize
Up to approx. 0.5 mm
PotLife
2 hours
SetTime
24 hours
TemperatureResistance
ȓ10 to 100°C and frost resistant when set
ThicknessRange
3 - 6 mm
Pset_CoveringCommon

More BIM objects