weberpral M

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

One coat, cementitious and through colour monocouche render suitable for most types of brick or blockwork.

Features and benefits:

  • One coat for fast application and short programme periods.
  • Formulated to be spray applied by render pump for faster application.
  • Self-coloured for low maintenance – decoration not required.
  • Can be used to create a scraped or roughcast finish.
  • Weather-resistant.
  • Algae-resistant.
  • Can be finished in a number of styles.
  • A+ Green Guide Rating.
  • IAB approved certificate no. 03/0180.

Constraints

Do not apply if frost is forecast within 24 hours of use, in damp or wet conditions, in temperatures below 5°C or above 30°C, or on elevations in direct sunlight or where the substrate is hot. Not suitable for use on construction board substrate (concrete particle board/render board), use weberend MT, not suitable for use on insulation board substrate, use webertherm XP.

Platform Compatible Version Certified to
IFC IFC - 1 2.1
Revit Revit - 1 2.1

  • Properties and values
  • More BIM objects

Properties and values

COBie
BOS_General
NBS_Data
Application
Hand or Pump Applied
Colour
Available in a range of 24 colours
Considerations
Do not apply if frost is forecast within 24 hours of use, in damp or wet conditions, in temperatures below 5°C or above 30°C, in direct sunlight or where the substrate is hot, not suitable for use on construction board substrate (concrete particle board/render board), use weberend MT, not suitable for use on insulation board substrate, use webertherm XP
Coverage
25 kg per m²
Curing
Curing with a fine spray of clean water may be necessary during rapid drying conditions, In hot climates curing as above is essential for 3 ȓ 5 days after application
GrainSize
n/a
ThicknessRange
15 - 25 mm
Pset_CoveringCommon

More BIM objects