weberpral D

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Proprietary one-coat through-coloured cementitious render system.

Features and benefits:

  • Provides weather protection.
  • A wide range of finish coat colours are available.
  • For application to a finished thickness of 15–25 mm.
  • Provides resistance to impact damage and cracking.
  • Can be mixed by either hand or machine - consult manufacturer for details.
  • BBA and BBA environmental profile approved.

Recommendations:

  • Installation to be carried out by a contractor recommended by the system manufacturer.
  • The use of movement joints will help reduce stress build up in the substrate and reduce the risk of cracking. Movement joints must continue through the render to the substrate - consult manufacturer for further details.
  • Where the product is exposed to severe impact (e.g. some industrial sites) or applied over existing background cracks, precautions may be required to reduce the risk of damage.
  • All the major building components must be fitted. This includes copings, cappings and flashings, windows and doors, soffits and fascias. The fittings must be detailed to protect the finished render from staining due to localised water run-off. Flue pipes, air bricks and weep holes should also be in final position prior to the application of render.
  • Ensure that supplies of materials are sufficient to give consistent and uniform colour and texture. To minimize variations in colour use materials from the same batch, avoid dry jointing and continuous surfaces must be completed without breaks.
Platform Compatible Version Certified to
IFC IFC - 1 2.1
Revit Revit - 1 2.1

  • Properties and values
  • More BIM objects

Properties and values

COBie
BOS_General
NBS_Data
Application
Can be used to create ashlar and quoin features, and is suitable for use on entire elevations, feature panels or smaller areas such as garden walls
Colour
Available in 26 colours
Considerations
Do not apply if frost is forecast within 24 hours of use, in damp or wet conditions, in temperatures below 5°C or above 30°C, on elevations in direct sunlight or where the substrate is hot, not suitable for use on construction board substrate (concrete particle board/render board), use weberend MT, not suitable for use on insulation board substrate, use webertherm XP
Coverage
25 kg per m²
Curing
Curing with a fine spray of clean water may be necessary during rapid drying conditions, In hot climates curing as above is essential for 3 ȓ 5 days after application
GrainSize
n/a
ThicknessRange
15 - 25 mm
Pset_CoveringCommon

More BIM objects