weberfloor fibre 4310

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Self-smoothing base and renovation screed suitable for residential and commercial areas.

Features and benefits:

  • Low Dust Technology™ reduces the amount of airborne dust released during the mixing process.
  • Application thickness as low as 20 mm for use on unbonded applications.
  • Fibre-reinforced screed for added durability — can be used as an alternative to a latex screed.
  • Reduces labour by up to 90% compared to sand and cement.
  • Rapid setting for quicker access to follow-on trades.
  • Suitable for pump application, allowing extremely high speed of installation.
  • Low shrinkage, reducing the risk of cracking.
  • Flowing product that leaves no voids, weak spots or areas of poor thermal performance.
Platform Compatible Version Certified to
IFC IFC - 1 2.1
Revit Revit - 1 2.1

  • Properties and values
  • More BIM objects

Properties and values

COBie
BOS_General
NBS_Data
Application
Applied to depths of 5-50 mm on concrete, sand, cement creeds, anhydrite screeds, timber, can also be used as a levelling compound for any base or renovation screeds
ApplicationTemperature
+10°C to +25°C
Binder
n/a
CompressiveStrength
C 25
Considerations
Cannot be used on external projects, must not be used as a wearing screed Ȕ either be directly tiled over or prior to receiving a soft floor covering cover with a thin layer of either weberfloor smooth 4150 or weberfloor smooth rapid 4160
FlexuralStrength
F 6
FlowRate
220 - 235 mm
HardeningTimeBeforeFinalCovering
1-3 weeks depending on layer thickness and drying conditions
HardeningTimeBeforeTiling
12 hours in normal conditions
Levelling
Sand, cement screeds, anhydrite screed, wooden boards, underfloor heating, insulation boards, existing boards, bitumen
MaterialConsumption
1.7kg/ m²/ mm
MinimumThickness
5 mm (25 mm on floating floors)
MinimumThicknessFloatingFloor
25 mm (with weberfloor 4945 fibre mesh)
MinimumThicknessOverSlipMembraneSolidSubstrate
20 mm
MinimumThicknessUnderfloorHeating
>15 mm over the heating pipes
Mix
n/a
PotLife
20 min (after adding water)
Reinforcement
n/a
Shrinkage
< 0.05% (28 days)
SubstrateStrength
1N/mm²
ThicknessRange
5 - 50 mm
WaterDemand
5 litres/ 25kg (20%)
WearResistance
NPD
Pset_CoveringCommon
Pset_CoveringFlooring

More BIM objects