weberfloor base rapid 4360

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Rapid drying, self-smoothing base and renovation screed suitable for residential, commercial and industrial areas.

Features and benefits:

  • Low Dust Technology™ reduces the amount of airborne dust released during the mixing process.
  • Application thickness as low as 30mm for use on unbonded applications.
  • Reduces labour by up to 90% compared to sand and cement.
  • Suitable for pump application, allowing extremely high speed of installation.
  • Low shrinkage, reducing the risk of cracking.
  • Flowing product that leaves no voids, weak spots or areas of poor thermal performance.
  • Durable material suitable as a base screed for industrial uses.
Platform Compatible Version Certified to
IFC IFC - 1 2.1
Revit Revit - 1 2.1

  • Properties and values
  • More BIM objects

Properties and values

COBie
BOS_General
NBS_Data
Application
Applied to depths of 20-80 mm on concrete, sand, cement creeds, anhydrite screeds, timber, can also be used as a levelling compound for any base or renovation screeds
ApplicationTemperature
+10°C to +25°C
Binder
n/a
CompressiveStrength
C 30
Considerations
Cannot be used on external projects, must not be used as a wearing screed Ȕ either be directly tiled over or prior to receiving a soft floor covering cover with a thin layer of either weberfloor smooth 4150 or weberfloor smooth 4160
FlexuralStrength
F 6
FlowRate
180 - 210 mm
HardeningTimeBeforeFinalCovering
1-7 days depending on layer thickness and drying conditions
HardeningTimeBeforeFootTraffic
2-3 hours in normal conditions
HardeningTimeBeforeTiling
12 hours in normal conditions
Levelling
Concrete, sand, cement screeds, anhydrite screeds, wooden boards, underfloor heating, insulation boards, existing tiles, bitumen
MaterialConsumption
1.85kg/ m²/ mm
MinimumThickness
20 mm
MinimumThicknessFloatingFloor
35 mm (with weberfloor 4945 fibre mesh)
MinimumThicknessOverSlipMembraneSolidSubstrate
30 mm
MinimumThicknessUnderfloorHeating
>25 mm over the heating pipes
Mix
n/a
PotLife
20 min (after adding water)
Reinforcement
n/a
Shrinkage
< 0.05% (28 days)
SubstrateStrength
1N/mm² (residential & commercial areas) 1.5N/mm² (industrial areas
ThicknessRange
20 - 80 mm
WaterDemand
4.5 litres/ 25kg (18%)
WearResistance
NPD
Pset_CoveringCommon
Pset_CoveringFlooring

More BIM objects