weberend MT - MTR124P

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

High performance multi-coat render system incorporating glass-fibre meshcloth and a resin-rich adhesive coat with a choice of textured finishes in a wide range of colours.

Platform Compatible Version Certified to
IFC IFC - 1 2.1
Revit Revit - 1 2.1

  • Properties and values
  • More BIM objects

Properties and values

COBie
BOS_General
NBS_Data
AdhesiveCoat
weberend LAC rapid is a factory batched mortar for scrimming
Application
Designed for application on to an appropriately framed, calcium silicate panelled background, for use on sound masonry substrates where the background is uneven and where a high level of crack resistance is required
Beads
Render only beads are available in coated galvanised, stainless, coated aluminium or rigid plastic in 3 m and 2.5 m lengths
Considerations
Do not apply if frost is forecast within 24 hours of use, in damp or wet conditions, in temperatures below 5°C or above 30°C, not suitable for application in direct sunlight or where the substrate is hot, cembrit PB substrate boards must not be used when the building height exceeds 3 storeys/7.2 metres, Prior to installation please ensure that you contact the manufacturer of the compatible substrate boards to obtain their fixing recommendations and ensure the boards suitability in withstanding the necessary wind load requirements for your specific project
FinalCoat
webersil TF
FirstUndercoat
weberend LAC rapid
Lathing
n/a
MeshDimensions
3.5 x 3.5 mm
MeshSize
1 m x 50 m roll
MeshWeight
160 g/m²
Primer
n/a
Reinforcement
Meshcloth
SealantMovementJointsBeads
n/a
SealantMovementJointsFixings
n/a
SealantMovementJointsSealant
n/a
SecondUndercoat
weberend LAC rapid
Standard
n/a
SubstratePreparation
n/a
SystemManufacturer
Saint-Gobain Weber
Pset_CoveringCommon

More BIM objects