Ascent Aluminium Walkway System For Standing Seam Roofs

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Ascent Aluminium Walkway creates a level, anti-slip, free draining walking surface to provide safe access across a Standing Seam roof. Supplied with or without handrail, it can be levelled or stepped to suit roof pitch. The walkway is manufactured in accordance with CE approved manufacturing processes to BS EN ISO 3834-2 2006 & Factory production control 1090-1. The walkway surface is PTV slip tested- classification Low. The walkway is tested in accordance with BS 516 & BS 4592 and the handrail in accordance with BS EN ISO 14122-3. Supplied from panels 2000 x 600mm. The walking surface panels can be joined end to end to form a linear run, at right angles to form a corner / T-junction or facetted to suit walkway route. Where a walkway route is required across a roof slope the walkway can be levelled through the introduction of an Ascent walkway levelling kit. The walkway is secured back to the roof using non-penetrative standing seam clips.

Platform Compatible Version Certified to
IFC IFC - 1 2.1
Revit Revit - 1 2.1

  • Properties and values
  • More information
  • More BIM objects

Properties and values

IFC
IfcExportAs
IfcBuildingElementProxyType
IfcExportType
USERDEFINED
COBie
BOS_General
NBS_Data
BalustradeGuardingSystem
true
DeckingAndFlooringMaterial
Aluminium
FrameFixingToSuperstructure
Standing seam clip
FrameSection
Aluminium
HandrailSystem
true
SystemManufacturer
Safety Fabrications Ltd
ToePlates
Available
Pset_BuildingElementProxyCommon

More information

More BIM objects