Anomatch - Powder coating

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Anomatch architectural powders have been specially designed to represent architectural anodising on both aluminium and galvanized steel. They are unique to Powdertech. Anomatch creates a finish that enhances the metal with a lustrous sheen.

Anodised aluminium has a reputation for its 'living' quality, with a natural metallic radiance. Anomatch creates the same effect with additional benefits.

  • A faster turn around and lower cost that anodising.
  • No need to use expensive high grade aluminium.
  • A homogenous finish across different metal batches and joined sections.
  • Steel can be chosen for its strength - and coated to appear anodised.
  • Qualicoat class 1 or class 2 approved.
  • Conform to ISO 12206.
Platform Compatible Version Certified to
IFC IFC - 1 2.0
Revit Revit 2017 + 1 2.0

  • Properties and values
  • More BIM objects

Properties and values

COBie
BOS_General
NBS_Data
AcceleratedColourChange
Accelerated weathering ISO 16474-2:2013 1000 hours no significant change in colour, >50% retained gloss
Adhesion
Dry adhesion cross hatch (ISO 2409) Rating 0, no coating detachment, wet adhesion (ISO 2409) after 1 hour pressure cooker rating 0, no detachment
Application
Architectural aluminium, galvanized steel, solar shading, curtain wall, facade, cladding, perforated and expanded aluminium, soffit and cappings, windows, trims, fittings
AppliedFilmThickness
>60 microns
AppliedGloss
5% - 35% at 60ᵒ
Corrosion
For more information please speak to Powdertech Corby Ltd
CuppingTest
Tested to ISO 1520 minimum 5 mm indent, No cracking or detachment
CylindricalMandrelBending
Tested to ISO 1519, 5 mm mandrel, no cracking or detachment
HumidityResistance
1000 hours to ISO 6272-2, <1mm scribe creep. No blistering in excess of 2(S2) to ISO 4628-2
ImpactResistance
Tested to ISO 6272-2 Reverse Impact test, no cracking or detachment
Permeability
No blistering or coating detachment
PowderApplication
Corona discharge system
PreTreatment
Aluminium - Titanium-zirconium (TiZr) non-chrome 6-stage pre-treatment, Galvanized steel - silane (oxsilan) non-chrome 8-stage pre-treatment
ResistanceToBoilingWater
No blistering and no loss of adhesion
ScratchResistance
E2 Pass to BS 3900
SulphurDioxideResistance
24 cycles no infiltration exceeding 1mm from the scribe, no change in colour or blistering in excess of 2(S2) to ISO 4628-2
Weathering
For more information please speak to Powdertech Corby Ltd
Pset_CoveringCommon

More BIM objects