To embed this BIM object onto your website, simply copy and paste the HTML code below.
<iframe src="https://www.nationalbimlibrary.com/en/syndicationgeneration/iframesingle/?objectId=253625" frameborder="0" width="225" height="285"></iframe>
Select regional version:
The object content is configured for use in UK, but it may also be suitable for use in other locations.
LPHW & Cold Water Services - Single Circuit, Single Application Controller: This is a line-sensing & or ambient sensing thermostat for LPHW pipe freeze protection circuits shall be controlled using a programmable, programmable ambient sensing control (PASC) thermostat, complete with adjustable hysteresis, high and low temperature alarm function, digital display, ‘offsite programming’ without external power supply, 25A switching capacity, sensor and voltage failure alarms, selectable fail safe mode (either ON or OFF), alarm relay for remote BMS monitoring and system error codes for quick diagnostic of system failure.
Size of the Raystat V5 is 210mm x 90mm x 85mm and is manufactured in Grey & Black Polycarbonate with an ingress rating of IP65 with an approximate weight of 990g. Temperature sensor : Sensor type NTC 2K Ohm / 25 deg’c 2 wire according to IEC/Class B, Sensor Head 50mm x 6mm Diameter, Sensor cable is made from Silicone 3m x 4mm Diameter (Sensor Cable can be extended up to 150mm when a cross section of 2 x 1.5mm2 is used. The cable exposure temperature is -40 Deg Cel to +90 Deg Cel (+215 Deg Cel, 1000h Max)
Your query has been sent.
A technical consultant from will be in touch soon.
Manufacturers using NBS National BIM Library adhere to our code of conduct.
The creation of BIM objects for the inclusion on the National BIM Library includes Omniclass classification codes and titles.
Copyright © 2014 the secretariat for the OmniClass Development Committee. All Rights Reserved. http://www.omniclass.org/