Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

A fibre reinforced anhydrite based thin bed adhesive designed for the internal fixing of fully vitrified porcelain, ceramic and natural stone tiles directly onto gyvlon/gypsum/anhydrite/calcium sulphate based screeds and gypsum plaster walls which have a Relative Humidity (RH) of up to 85%. Unlike when cement-based adhesive are used, surfaces do not require sealing, however it is recommended that the substrates are primed with Norcros Prime Bond diluted 1:4 with water to reduce porosity and suppress dust. The primer should be allowed to dry before tiling commences.

When cured, the adhesive achieves comparative strengths to a conventional C2 cement-based adhesive.
Norcros Tile to Gypsum has a significantly lower carbon footprint than traditional cement-based adhesives.

Platform Compatible Version Certified to
IFC IFC 2X3 2 1.3
Revit Revit 2016 + 5 2.0

  • Properties and values
  • More information
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
Application
Notched trowel.
BedThickness
2-6 mm (12 mm in small areas)
Classification
N/A
EnvironmentalProductDeclaration
ISO 14001:2004
OpenTimeMinimum
5 minutes
Primer
Surfaces can be primed with Norcros Prime Bond
RecommendedUses
Interior to gypsum surfaces
SettingTime
32 hours (20°C)
SuitableCoverings
Fully vitrified porcelain tiles, ceramic tiles and natural stone tiles
SuitableSubstrates
Anhydrite screeds, heated floors and plasterboard/ plaster
TensileStrength
≥1.0 N/mm²
Pset_CoveringCommon

More information

  • NBS specification data
  • More BIM objects

    What's Changed?

    2/28/2017

    Changes to reflect updates to the NBS BIM Object Standard v1.3

    • Removal of Uniclass2 property
    • Addition of Uniclass 2015 properties
    • Addition of COBie Category property value

    Objects have also been updated to Revit 2015