NBS Source
I'm a manufacturer

Bridge Expansion Joints - Emseal BEJS System - Watertight expansion joint

Verified by manufacturer 4 months ago

NCC – Emseal Movement Joints Third party certifications:
  • Declare

    Declare

    Certificate type

Watertight movement joint system for bridge deck joints. parapet & wing joints etc.

Jump to:
BOS
+44 (0) 1257 266696 Website

Application

  • Watertight, traffic durable, joint-face-adhered, precompressed, primary seal for retrofit and new expansion joints in road bridges, wing walls, abutments, jersey barriers, longitudinal joints, precast panels, etc.
  • Suitable for new construction and retrofit bridge preservation of old or failed joint Systems in concrete or rebuilt joint edges. Use in embedded metal angles where demolition or removal of the metal angles is not feasible and where existing joint opening is suited to the movement capability of BEJS.
  • Suitable for lasting replacement of failed caulk joints.

Description

The BEJS System (Bridge Expansion Joint System) is comprised of a precompressed, silicone-and-foam hybrid installed into field-applied epoxy adhesive on the joint faces; with the silicone bellows locked to the joint faces with a silicone sealant band.


The BEJS System features an innovation in sealant technology in the form of a microsphere-modified, 100% acrylic impregnation infused into the cellular foam base material.


The material is odorless, clean handling, UV stable, non-staining, and features low temperature flexibility not previously available in asphalt, wax, or isobutylene-based predecessors or competitors. The result is extension of the usability of the product to applications where asphalt and wax-based predecessors did not work well under conditions of thermal shock (rapid opening and closing of joints during large temperature swings). These applications include joint-face adhered installations on bridge decks, wing walls, abutments, jersey barriers, precast panels, etc.

Suitability is further extended to applications in colder geographical regions to which asphalt and wax-based predecessors have not previously been recommended.


Features and benefits:

  • Watertight – the tensionless silicone bellows are installed just below the deck surface. This ensures watertightness is achieved at the deck surface.
  • Non-Invasive Anchoring – there are no hard metal-to-concrete connections with the BEJS System. This includes embedded pins, anchors, screws, bolts or tracks, trays or rails. The System is locked to the joint faces by means of the backpressure of the foam; the epoxy adhesive; and the injected silicone sealant band at the joint face to foam and silicone bellows interface.
  • Continuity of Seal – as in all Emseal expansion joint Systems, continuity of seal through changes in plane and direction is an essential performance differentiator. 'Universal 90s“ Kick-out Terminations' and 'Custom Transitions' are factory fabricated transition pieces from Emseal that can be installed at inside corners and outside corners as needed and are warranted by Emseal to be watertight through the entire movement capability of the product. Alternatively, details for field-fabricated transitions from deck to wall, at curbs, sidewalks, parapets, tees, and crosses are available from Emseal.
  • Movement capability: +60% and -60% (Total 120%) of nominal material size.

General information

Color

Finish

Smooth

Material

Foam

Silicone

Epoxy

Shape

Rectangle

Square

Other

Length

2000 mm

3650 mm

Width

Bespoke

Height

Bespoke

Uniclass

Pr_25_71_44_64 Plastics compressible joint fillersPrimary

CAWS

Q21/470 Expansion joints

Q21/470 Expansion joints

Specification data - Plastics compressible joint fillers

Material

Produced by infusing a cellular foam base material with a hydrophobic, microsphere-modified acrylic impregnation, and coating the surface with a high-performance silicone to suit the application.

Size

-

Manufacturer guidance

Standard sizes from 12–160 mm. 2 m length (shrink

wrapped sticks).


Standard sizes from 12–50 mm. 3.65 m length (reels).


Elongation

Minimum 150%.

TensileStrength

Minimum 18 psi.

Resistance

UV / Moisture Resistance: No Changes - 2000 hours, Pass.

Sustainability data

Contains Red List materials

No

Country of material origin

United States

Country of product manufacture

United States

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
IFC
-

1

Revit
-

1

Third party certifications

Declare

Declare

BEJS Product Evaluation-New York State DOT

Literature

NCC-Emseal-BEJS Bridge Joint Brochure

NCC-Emseal-BEJS Bridge Joint Brochure

Case studies

Emseal BEJS used to repair and reseal the deck joints on Whitton Park Road Bridge

Emseal BEJS used to repair and reseal the deck joints on Whitton Park Road Bridge

Emseal BEJS used to seal Parapet & wing wall joints on the new Dodmoor Bridge A45, Daventry Link Road   in Northamptonshire

Emseal BEJS used to seal Parapet & wing wall joints on the new Dodmoor Bridge A45, Daventry Link Road in Northamptonshire

Similar products from NCC – Emseal Movement Joints

Acoustic Movement Joint - Emseal QuietJoint® - Acoustic Joint Filler

Acoustic Movement Joint - Emseal QuietJoint® - Acoustic Joint Filler

Horizontal-plane Deck Joints - Emshield DSM System - Watertight expansion joint

Horizontal-plane Deck Joints - Emshield DSM System - Watertight expansion joint

Trafficked Deck Movement Joint Sealing System - Emseal SJS System  - Deck joint sealing system

Trafficked Deck Movement Joint Sealing System - Emseal SJS System - Deck joint sealing system