Can't find a BIM Object?
Tell us who you would like to see BIM objects from or what objects you would like to see.
Polymer-modified cementitious mortar are described by characteristics such as third party product certification. An example use may be within a concrete protective coating system.
Showing 1-14 of 14
Ideal for bedding mortar for large floor tiles, natural stones or brick pavers, and can also be used to form ramps and falls. Suitable for internal and external areas.
Water-repellent cementitious skimming mortar with a fine-textured, natural finish for concrete and plastic, glass and porcelain coverings.
Two-component flexible cementitious mortar for waterproofing concrete and masonry surfaces subject to negative and positive hydraulic pressure.
Two-component rapid-drying elastic cementitious mortar for waterproofing terraces and balconies, including at low temperatures and on substrates not completely dry.
Single component, ready-to-use cementitious waterproof coating system.
Three-component polyurethane/cement-based mortar for making covings and details.
Three-component polyurethane/cement-based formulate for coating walls and as a finishing coat on polyurethane/cementitious systems for industrial floors.
Three-component, high-strength, easy-to-apply, polyurethane-cement mortar with high resistance to chemicals. For coating industrial floors in layers from 6-9 mm thick.
ARDEX X 32 can be used both internally and externally for bed thicknesses from 3 mm to 30 mm, and it is ideal for fixing uncalibrated natural stone.
ARDEX X 7 R is a rapid setting flexible tile adhesive that allows tiles to be grouted and trafficked just 2 hours after fixing.
ARDEX X 7 R is a rapid setting flexible tile adhesive that allows tiles to be grouted and trafficked just 2 hours after fixing.
A polyurethane and cement-based formula, with high mechanical strength and excellent resistance to chemicals.
A polyurethane and cement-based formula which is highly resistant to chemicals, abrasion and temperatures. It has a high mechanical strength and may be applied at thicknesses from 3-4 mm.