ND – Double Deflection Rubber Mounts

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Our ND rubber double deflection mounts are used to isolate mechanical plant and machinery, as well as supporting floating floor systems. For example, the ND mounts can be used to construction of formwork LDS rubber floating floor systems. They have a large load range, starting as low as 7kg and going up to almost 2000kg. The ND mounts offer more than three times the deflection than pads. They incorporate a lower steel plate to allow for effective fixing in place, however, the bottom friction surface makes bolting unnecessary in most installations. A steel plate is also encased at the top to ensure evenly spread load throughout. The rubber encasement also helps to prevent corrosion. There is a threaded insert and cap screw for easy attachment to equipment, and the inner section is hollow, allowing for horizontal movement in shear. Standard mountings are furnished in oil resistant Neoprene, but other material finishes are available such as LDS (Low Dynamic Stiffness).

Platform Compatible Version Certified to
IFC IFC - 2 2.1
Revit Revit - 2 2.1

  • Properties and values
  • More BIM objects

Properties and values

IFC
IfcExportAs
IfcBuildingElementProxyType
IfcExportType
NOTDEFINED
COBie
BOS_General
NBS_Data
Deflection
9 mm
StaticLoadRange
7 - 20 kg
Pset_BuildingElementProxyCommon

More BIM objects