HDSM-A Joist Hanger

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Joist or wall hanger with double deflection LDS rubber element. They can be fitted with a ceiling channel clamp or eye bolt. HDSM-A hangers consist of a side attachment steel angle gusseted on each side to prevent bending. The gussets protect an AASHTO bridge bearing quality LDS rubber element moulded with an integral lock in grommet at the bottom to prevent steel rod to housing acoustical short circuiting. Dynamic Stiffness does not exceed 1.4 nor the corrected frequency of 8Hz. Housing configurations offered for simple attachment to 1.5″ x .5″ channels or 12 gauge wire. The HDSM-A hangers use a high quality low dynamic stiffness natural rubber element which offers excellent acoustic isolation properties. The hanger range is available with different rubber stiffnesses to suit different ceiling weights. The load capacity ranges from 20kg to 57kg.

Platform Compatible Version Certified to
IFC IFC - 1 2.1
Revit Revit - 1 2.1

  • Properties and values
  • More BIM objects

Properties and values

IFC
IfcExportAs
IfcBuildingElementProxyType
IfcExportType
NOTDEFINED
COBie
BOS_General
NBS_Data
Deflection
6 mm
DropRodMisalignmentCapability
n/a
IsolationHangersType
Rubber
Load
Up to 20 kg
RatedFrequency
8 Hz
Pset_BuildingElementProxyCommon

More BIM objects