Select regional version:
The object content is configured for use in UK, but it may also be suitable for use in other locations.
Water-based synthetic resin primer for treating gypsum or anhydrite substrates prior to installing ceramic tiles or stone material with cementitious adhesives.
It has very low emissions of TVOC and can be used for minimizing general dust suppression and reducing the absorption of very porous substrates.
Suitable for use on an absorbent substrate only e.g. screed, plasterboard, plywood.
| Platform | Compatible | Version | Certified to |
|---|---|---|---|
IFC
|
2X3 | 2 | 1.3 |
Revit
|
2015 + | 3 | 1.3 |
| Application |
|
Brush or spray |
| ApplicationTemperatureRange |
|
5-35°C |
| Consistency |
|
Low viscosity liquid |
| Density |
|
1.01 g/cm³ |
| DryingTime |
|
>2 hours |
| Form |
|
One-component |
| pH |
|
8 |
| SolidsContent |
|
0.18 |
| SuitableCoverings |
|
Ceramic tiles, stone |
| SuitableSubstrates |
|
Gypsum or anhydrite substrates |
| TotalVOCsMaximum |
|
EMICODE EC1 |
| Viscosity |
|
20 MPa-s |
Changes to reflect updates to the NBS BIM Object Standard v1.3
Objects have also been updated to Revit 2015 |
