Can't find a BIM Object?
Tell us who you would like to see BIM objects from or what objects you would like to see.
Liquid applied waterproofing
Cold applied polymer modified bitumen waterproof coating.
Flexible, resin-based, cold applied, liquid waterproof coating system.
Hot Melt waterproofing membrane suitable for flat roofing applications when covered by a suitable protection or when used in an inverted or green roof build up.
Two coat, cold applied, gas resistant coating system.
Ready-to-use flexible liquid membrane with fibres for continuous waterproofing layers on exposed external surfaces.
A cold applied one component, pitch free, moisture curing, modified polyurethane elastomeric waterproofing membrane.
PPG EP001 Epoxy DPM Floor Primer is a two-component solvent-free liquid applied surface damp proof membrane and residual moisture suppressant.
Fast drying flexible liquid tanking membrane for the interior waterproofing of bathroom and shower walls and floors before installing ceramic tiles and natural stone.
Resin based instant roof repair compound for immediate waterproofing.
PPG EP4501 is a medium duty, flow applied epoxy floor topping for use on concrete and polymer modified cementitious screeds.
Ready to use, flexible, ultra rapid drying waterproofing membrane for interior and exterior use in showers, wet rooms and on balconies.
PPG FLOORING EP201 Is a semi-gloss, two-component water dispersed epoxy floor coating for use on concrete substrates and polymer modified cementitious screeds
PPG EP002 is a two-component epoxy primer with good penetrating properties for use on concrete and polymer modified cementitious screeds.
PPG EP301 is a two-component solvent free epoxy floor coating offering excellent abrasion and chemical resistance.
Two-component, polyurethane finishing sealer to be used as a dust-repellent and anti-oil finishing coat on concrete and Ultratop, or as a finishing coat on epoxy systems.
Two-component, protective acrylic filming agent in water dispersion for concrete, Ultratop and Ultratop Living floors.
Two-component, aliphatic polyurethane coating product in water dispersion with a matt transparent or coloured finish.
Two-component, aliphatic, transparent, matt polyurethane finish in water dispersion with no NMP for protecting resin systems.
Two-component, single coat application, damp proof membrane for controlling residual and constructional moisture in cementitious substrates.
Two-component, solvent-free, one or two coat pure epoxy resin, used as a moisture barrier on cement-based substrates with residual or static moisture.
Highly protective, mould and mildew resistant acrylic coating product for internal and external surfaces. Available in 1.2 mm and 1.5 mm granual sizes.
Acrylic plaster with scratch-effect for internal and external application - good protection, evens out the substrate defects.
Rapid Drying One Coat Surface Damp Proof Membrane for protection up to 98% relative humidity.
Two-component epoxy resin-based, self-levelling, epoxy finish coat with a coloured granular effect, to create floors which are resistant to abrasion.
Two-component, multi-purpose, neutral-coloured epoxy formulate for industrial flooring
Two-component, multi-purpose epoxy treatment used for obtaining self-levelling and multi-layer coatings on industrial floors.
Resucoat Deco Flake SF is a multi-component epoxy fl oor system which utilises coloured flakes applied to a base coat to provide a 1 mm thick decorative flooring finish.
Resucoat™ HB S is a high build epoxy resin system for application as a heavy duty floor coating at a thickness of around 500 microns.
Resudeck™ EP is a multi-component epoxy flooring system for underground and basement car park decks where thermal cycling conditions do not require crack bridging properties.
Resuflor™ FX S is a self-smoothing polyurethane modified epoxy resin floor system which provides a flat hard wearing gloss finish 2–3 mm in thickness with a degree of flexibility.