Osprey 6+0 Powered - Sliding door

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Electrically operated, bi-Folding industrial door with high insulation values available in a range of colours. The door consist of solid, polyurethane filled panels that are top hung and fold clear of an opening. The panels can incorporate varying window sizes and are locked in the close position using 1 No. drive chain driven drive unit.

Platform Compatible Version Certified to
IFC IFC - 1 2.0
Revit Revit 2017 + 1 2.0

  • Properties and values
  • More information
  • More BIM objects
  • What's Changed?

Properties and values

IFC
IfcExportAs
IfcDoorType
IfcExportType
DOOR
COBie
BOS_General
NBS_Data
Accessories
Photocells, traffic lights, opening safety sensors, safety edges
AirPermeability
Class 2 (without wicket door)
Applications
Emergency services bays, small aircraft and helicopter hangars, military vehicle garages, workshops, loading bays, power stations
Arrangement
Sliding folding
ControlLogicOptionOne
Semi-automatic - single push to open and close with a stop button that stops door
ControlLogicOptionTwo
Automatic - single push to open, automatic closing after pre-set pause time, stop button stops and holds doors
ControlLogicStandard
Deadman - continuous push to open, continuous push to close and should be used unless a safety edge is installed
DoorLeavesConstruction
Panels are constructed from 1.6mm thick cold rolled galvanised dovetail channel frames with 5mm thick local reinforcement for hardware, the frame is covered on both sides with 0.7mm thick galvanised steel sheets and pressure injected with CFC-free polyurethane foam to form an extremely strong, rigid, flat panel
DoorSealing
Flexible rubber seals
DriveSystem
A GFA 91RD3 with built on frequency converter, or GFA 140Fi with built on frequency inverter drive motor operates the door and are fitted with low-level haul chains for instant manual operation in the event of power failure
FinishOptionOne
Colorcoat LG Plastisol in poppy red, solent blue, ocean blue, olive green, goosewing grey, merlin grey and white, or Colorcoat Prisma in silver metallic, inside face -Colorcoat LG Plastisol in white, all hinges and drop bolt sleeves are black polyester powder coated in RAL 9005 (M)
FinishOptionTwo
Inside and / or outside faces of panels are polyester powder coated in a choice of colours 40 stock RAL colours, all hinges and drop bolt sleeves are black polyester powder coated in RAL 9005 (M)
Hardware
n/a
HeadroomRequired
230 mm
Hinge
n/a
IntermediateHinges
Machined from solid aluminium extrusions, fitted with sealed for life igus bushes and 16mmØ stainless steel hinge pins
JambHinges
n/a
LockingAndHandlesOptionOne
A lever operated floor bolt is fitted internally to each door half and is electronically interlocked
LockingAndHandlesStandard
Drive motors automatically lock the door in the closed position. A pull chain is mounted on the drive for manual override open of door
MaxDoorArea
36.3m²
MotorPower
0.45kW - 0.85kW
OddLeafHardwareStandard
n/a
OpeningSpeed
Opening speed up to 0.4m/s (folding 1-way)
Operation
Powered
OperationalControls
Push button, keyswitch, digi-key, radio contol, movement sensor
PanelUValue
0.40 W/m²/°C
PowerSupply
400 v, 3 pn, 50 hz
SafetyFeatures
A full height wireless opto-electronic safety edge is mounted within the leading edge seal(s) of the door, Infrared presence detection sensors are fitted to the inside face of the trailing edge leaf to each door half to prevent the door impacting and crushing a person or object during movement
SideroomRequired
Refer to OSP5100 series drawing
SlamPost
A 100 x 65 RSA slam post is supplied with all doors
TopGuideRollers
Pendant hangars are heavy-duty fabrications, each with a Ø72 mm sealed bearing wheel, two Ø40 mm side thrust sealed bearings, each pendant is vertically adjustable
TopGuideTrack
The top track is a 5 mm thick pressed steel ȘC’ section for direct sidewall mounting
TrackSystem
Top guide track with bottom track at floor level
VisionPanelsOptionOne
Black thermoplastic snap-lock window with integral double-glazed units (2.5~15~2.5) san rs uv (scratch and uv resistant) outside, pmma uv inside
VisionPanelsOptionTwo
Thermally broken aluminium window frame with one-piece inner liner tray, window units are double glazed (4~20~4), argon filled, low e toughened glass, frames are polyester powder coated in matt black to RAL 9005 (M)
VisionPanelsStandard
None fitted
WaterPenetration
Class 3 (without wicket door)
Weight
20 - 24 kg/m²
WicketDoorOptionOne
Lever furniture, wicket door opens outwards, hardware comprises a briton 5520 mortise sashlock, 25 mm low-profile anodised aluminium lever handles, external europrofile cylinder with internal thumbturn, 1½ pairs of stainless steel butt hinges and a hidden door limiting stay, 85 mm high step with 40 mm wide aluminium threshold strip
WicketDoorOptionTwo
Emergency escape furniture, wicket door opens outwards, hardware comprises a briton 379 panic bar, external override cylinder and finger latch 1½ pairs stainless steel butt hinges and a hidden overhead door limiting stay, 85 mm high step with 40 mm wide aluminium threshold strip
WicketDoorStandard
None fitted
WidthBiPart
n/a
WidthOneWay
6050 mm
WindowFrameSizeOptions
400 x 600 mm, 600 x 600 mm, 400 x 1200 mm, 600 x 1200 mm, 770 x 430 mm
WindPressure
Wind pressure(²) - 0.7 kn/m² (6 m high door), 1.1 kn/m² (5 m high door), 1.7 kN/m² (4 m high door), 3.1kN/m² (3m high door)
Pset_DoorCommon
Pset_DoorWindowGlazingType

More information

  • NBS specification data
  • More BIM objects

    What's Changed?

    2/25/2019

    Objects reviewed.