MuteClip® LP with MuteClip® Channel

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

MuteClip® LP (Low Profile) is our sound isolation clip for ceilings that is unique in its design with its dual density rubber isolators, each carefully designed and assembled to improve noise reduction over a broad range of frequencies while remaining stable and consistent with every MuteClip® LP. The adopted low profile helps to reduce the loss of room height while maintaining the same performance as the standard MuteClip®, it is installed into the side of the joist so that the MuteClip® Channel runs parallel to, and is sufficiently lower than the joist to attach the next layer of the system to. The MuteClip® LP systems are designed to minimise the points of contact with the joists while creating a system that is easy to install with little to no error due to the accomplished design. The use of MuteClip® LP within a ceiling partition achieves excellent soundproofing against both impact and airborne noise on a wide range of projects.

Platform Compatible Version Certified to
IFC IFC - 2 2.1
Revit Revit - 2 2.1

  • Properties and values
  • More BIM objects
  • What's Changed?

Properties and values

IFC
IfcExportAs
IfcBuildingElementProxyType
IfcExportType
NOTDEFINED
COBie
BOS_General
NBS_Data
MaximumLoad
16 kg (36 lb) per each MuteClip
Performance
Rated at 60dB for airborne, and at 35dB for impact transmission
Weight
674 g
Pset_BuildingElementProxyCommon

More BIM objects

What's Changed?

5/19/2020
Data correction