Megaflo Cylinder Package Hot Water Only

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Unvented direct hot water cylinder with washing machine frame.

Platform Compatible Version Certified to
IFC IFC 2X3 2 1.3
Revit Revit 2015 + 2 1.3

  • Properties and values
  • More information
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
Accessories
Horstmann Electronic 7 immersion heater controller, Pre-plumbed cold water control pack (CWP1), Pre-plumbed cold water control pack (CWP2), Pre-plumbed cold water control pack (CWP3), Slatted shelf frame
CylinderConnections
Inlets and outlets: ¾" BSP male parallel and 22 mm compression fittings; U+00BD" temperature and pressure relief valve: 15 mm compression outlet
CylinderSize
802 x 579 x 579 mm
EnvironmentalProductDeclaration
n/a
ErPRating
C
Fixing
Floor fixed
FlowRate
≤72 L/min
HeatUpTime
92 minutes
ImmersionHeater
One 3 kW titanium element with integral thermostat and thermal cut-out
OutletTemperatureRange
12-68°C
SafetyFeatures
Manually resettable cut-out on heating element operates at 85°C, temperature and pressure relief valve factory set to operate at 10 bar and 90°C
SupplyPressureRange
1.5-16.0 bar
ThermalInsulation
60 mm thick CFC/HCFC free (ODP zero) polyurethane
ThirdPartyCertification
Kiwa approved, Nemko approved
WashingMachineConnections
Washing machine waste pipe: 40 mm; HepVO dry trap: 32 mm
WashingMachineFrameSize
900 x 660 x 660 mm
Pset_BoilerTypeCommon
Pset_ElectricalDeviceCommon
Pset_TankTypeCommon
Pset_TankTypePreformed

More information

  • NBS specification data
  • More BIM objects

    What's Changed?

    3/9/2017

    Changes to reflect updates to the NBS BIM Object Standard v1.3

    • Removal of Uniclass2 property
    • Addition of Uniclass 2015 properties
    • Addition of COBie Category property value

    Objects have also been updated to Revit 2015