Fire Shutter - Fireguard - FG04

Download

The object content is configured for use in , but it may also be suitable for use in other locations.

Tags:

240 minute fire protection shutter that automatically operates in an emergency situation once a signal is received from a connected fire alarm system.

 

Features and benefits:

  • Four hour fire protection.
  • Recommended maximum width up to 10 000 mm.
  • Tested to BS EN 1634-1 and compliant with BS EN 16034:2014.
  • Galvanized steel finish with powder coating available at additional cost.
  • Manufactured from 76 mm cold rolled 20 gauge galvanised steel sections.
  • The shutter box is manufactured from 1.5 mm bright spangle galvanized pressed steel coil casing, available in different designs to suit project requirements.
  • Other models in the range can provide 120 or 240 minutes' fire protection (specified separately).
  • Electrically operated through industrial grade 1 phase motor controlled by up/stop/close controller.
  • Auto-reset solenoid for integration with fire alarm to enable the motor to automatically unbrake and close under controlled decent.
  • FCP03 fire panel which can be interconnected to the Fire Alarm to allow closing when receiving fire signal.
  • Further safety devices are available, dependent on requirements and operational circumstances.
  • Audio visual warning and timer delay.

 

FIRAS INSTALLER CERTIFICATION SCHEME

 

HAG Is accredited to install fire protection products by Warrington fire through its FIRAS installation certificate scheme.

 

FIRAS is the mark of endorsement of competency in the installation of products and systems, vital for achieving the protection required and is accredited by UKAS to BS EN ISO/IEC 17065:2012.

 

Insurances could be invalid if proof of a competent product installer is not verified.  

Platform Compatible Version Certified to
IFC IFC - 1 2.1
Revit Revit - 1 2.1

  • Properties and values
  • More information
  • More BIM objects
  • What's Changed?

Properties and values

IFC
IfcExportAs
IfcDoorType
IfcExportType
DOOR
COBie
BOS_General
NBS_Data
Arrangement
Vertical rolling, automatic
CountryOfProductManufacture
United Kingdom
Format
Internal,External
FrameAndGuidesMaterialColour
Galvanized
FrameAndGuidesMaterialFinish
Galvanized,Polyester powder-coated
Operation
ROLLINGUP
OperationMode
Manufacturer's standard
ShutterCurtainFinishAndColour
Galvanized,Polyester powder-coated, colour
ShutterCurtainLathMaterial
Galvanized steel
ShutterCurtainProfile
Curved
Standard
To BS EN 1634-1; compliant with BS EN 16034:2014
Width
0

More information

  • NBS specification data
  • More BIM objects

    What's Changed?

    2/28/2017

    Changes to reflect updates to the NBS BIM Object Standard v1.3

    • Removal of Uniclass2 property
    • Addition of Uniclass 2015 properties
    • Addition of COBie Category property value

    Objects have also been updated to Revit 2015

    5/5/2016