Hadley EavesBEAM

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Eaves Beam sections are designed to act as an eaves purlin, top sheeting rail and gutter support.

HADLEY EavesBEAM sections are produced as C profiles for detailing simplicity and manufacture. Three depths are available – 200, 255 & 305 in various gauges as listed. Web holes are 14 dia. for M12 fasteners and may be counter formed to provide a flush cladding face if required. When using countersunk M12 set screws, an allowance of 5 mm should be made for the depth of counter form. The counter formed holes bear directly onto cleats and accessories meaning packer plates are not required. The top flange can be angled from 0° - 25° in 5° increments.

Eaves Beams are designed for combined vertical and horizontal actions as single span beams. Horizontal forces are deemed to be transmitted through the roof diaphragm via the Eaves Brace(s).

 

 

Platform Compatible Version Certified to
IFC IFC 2X3 1 1.3
Revit Revit 2016 + 2 2.0

  • Properties and values
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
AncillaryComponents
Cleats, Web stiffener, Eaves Brace Assembly, Under Purlin Eaves Brace, Side Rail Hanger Assembly
FlangeLip
19
FlangeWidth
75
MaterialCoatingFinish
N
MaterialDesignation
S450+Z
MaterialStandard
BS EN 10346
MaterialThickness
1.8
MomentCapacity
13.6 kNm
PrimaryComponents
Eaves Beam
RadiusOfGyrationMajorAxis
79 Rxx mm
RadiusOfGyrationMinorAxis
27.3 Ryy mm
SecondMomentOfAreaMajorAxis
420.37 cmɴ
SecondMomentOfAreaMinorAxis
50.33 cmɴ
SectionModulusMajorAxis
42.04 cm³
SectionModulusMinorAxis
9.43 cm³
SurfaceQuality
A
SurfaceTreatment
n/a
Pset_MemberCommon

More BIM objects

What's Changed?

11/21/2018

Updated manufacturer's product information.

7/13/2018