Gypsol TS-15 ultra thin flowing screed

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

TS-15 screed is designed specially for ultra thin depths. It is a combination of Gypsol binder, specially selected sands, and water mixed in quality-assured ready-mix facilities to produce a pump applied, flowing, self-compacting and self-smoothing floor levelling screed.

Minimum Depths:

  • Bonded: Minimum 15 mm on a fully prepared concrete substrate.
  • Unbonded: minimum 15 mm over a polythene membrane or in direct contact with an unprepared concrete substrate.

Maximum Bays:

  • Unheated: 800 m², aspect ratio 8:1, length 40 m.
  • Heated: 400 m², aspect ratio 6:1, length 20 m.

Physical Properties:

  • Strength: Min C30 F5.
  • Reaction to Fire: Class A1f.

Environment and Welfare: Binder

  • Contains 98% recycled material
  • CO2 Footprint 26.26 kg of CO2/tonne.
  • 100% Recyclable
  • VOC Virtually Zero
  • Protein free
  • Ergonomically friendly installation
Platform Compatible Version Certified to
IFC IFC 2X3 3 1.3
Revit Revit 2016 + 4 2.0

  • Properties and values
  • More information
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
BondingCoat
Epoxy, Polyurethane, or Acrylic
EdgeStripsAtPerimeterAbutmentsJointing
Taped
EdgeStripsAtPerimeterAbutmentsType
Extruded polyethylene with laminated polythene skirt attached
EdgeStripWidth
8 mm (heated), 5 mm (unheated)
FootTrafficHardeningTime
24 to 48 hours
LoadingTime
5-7 days
MaximumBaySize
Unheated: 800 m², aspect ratio 8:1, length 40 m; Heated: 400 m², aspect ratio 6:1, length 20 m
MovementJointsBedding
n/a
MovementJointsFixing
Taped
MovementJointsType
Saw cut to one third of screed depth, or preformed rigid insulation joints
Preparation
n/a
ScreedSurfaceTreatment
Sanded to remove surface laitance
ScreedThicknessMinimum
15 mm
ScreedType
Gypsol TS-15 Ultra Thin Flowing Screed
SeparatingLayerJointing
n/a
SeparatingLayerMaterial
n/a
SubstrateThickness
100 mm
SuitableCoverings
Suitable to receive all floor coverings
SuitableSubstrates
Concrete or existing screeds
SystemAccessories
n/a
Pset_SlabCommon

More information

  • NBS specification data
    Case studies and technical literature
  • More BIM objects

    What's Changed?

    1/19/2017

    Changes to reflect updates to the NBS BIM Object Standard v1.3

    • Removal of Uniclass2 property
    • Addition of Uniclass 2015 properties
    • Addition of COBie Category property value

    Objects have also been updated to Revit 2015