Gypsol Solida heated screed system

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Solida is a whole house heating system which seeks to encourage the use of low temperature and fast response, screeded underfloor heating systems at all floor levels in single dwellings, using high strength Gypsol screeds as the heat transfer medium.

Some of the benefits include:

  • Reduced energy use and higher efficiency.
  • Increased useable room space.
  • Improved acoustic performance.
  • Improved fire performance.
  • Improved kerb appeal and potential higher asset value.
  • Improved environmental performance.
  • No creaky timber floors.
  • Easy design transition.
  • Possible improved profitability.

The system is tested structurally based on 220 mm engineered I joists at 600 mm centres and 4.8 m clear spans with a minimum 22 mm OSB deck.

Platform Compatible Version Certified to
IFC IFC 2X3 3 1.3
Revit Revit 2016 + 5 2.0

  • Properties and values
  • More information
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
ConduitCover
25 mm
DampProofMembraneMaterial
1200 gauge polythene
EdgeStripsAtPerimeterAbutmentsJointing
Taped
EdgeStripsAtPerimeterAbutmentsType
Extruded polyethylene with laminated polythene skirt attached
EdgeStripWidth
8 mm (heated), 5 mm (unheated)
FootTrafficHardeningTime
24 to 48 hours
HasUnderfloorHeating
TRUE
InsulationJointing
As manufacturers requirements
InsulationMaterial
n/a
InsulationThickness
0
LoadingTime
7 days
MaximumBaySize
Unheated: 800 m², aspect ratio 8:1, length 40 m; Heated: 300 m², aspect ratio 6:1, length 20 m
MovementJointsBedding
n/a
MovementJointsFixing
Taped to slip membrane
MovementJointsType
Saw cut to one third of screed depth, or preformed rigid insulation joints
Preparation
n/a
ScreedSurfaceTreatment
Sanded to prepare to receive floor coverings
ScreedThicknessMinimum
30 mm
ScreedType
Gypsol TimBre Self Levelling Anhydrite Screed
SeparatingLayerJointing
Lapped by 100 mm and taped
SeparatingLayerMaterial
Minimum 500 ga polythene slip membrane
SubstrateThickness
100 mm
SuitableCoverings
Suitable to receive all floor coverings
SuitableSubstrates
Minimum 18 mm OSB decking, supported by 220 mm timber I-joists at 600 mm c/c
SystemAccessories
Optional underfloor heating
Pset_SlabCommon

More information

  • NBS specification data
  • More BIM objects

    What's Changed?

    6/12/2017

    Uniclass 2015 update

    5/15/2017
    1/19/2017