NBS Source
I'm a manufacturer
Compare variants

HYDRODUCT® 401/ 501

Verified by manufacturer over a year ago

Hydroduct® 401

GCP Applied Technologies Variant:

Geocomposite drainage sheets.

Jump to:
BIM object icon
+44 (0)1753 490000 Website

Application

For horizontal roofs and decks. Suitable for draining and irrigating green roofs or planter boxes. Principal applications:

  • Conventional green roofs;
  • Low maintenance green roofs;
  • Landscaped inverted roofs;
  • Concrete decks with planted areas;
  • Podium deck planter boxes.

Description

Polypropylene non-woven filter fabric on one face of an 12 mm studded drainage core with a separation geotextile bonded to the other face. For low and regular maintenance green roofs and planter boxes with minimum falls of 1 in 80.


Features and benefits:

  • Polystyrene has minimal creep under long term loading.
  • Fully compatible with GCP waterproof membranes.
  • Provides additional factors of safety against water penetration through roof decks.
  • Range of filter fabrics to cover hard and soft landscaped finishes.
  • Range of compressive strength cores to suit different loading and trafficking conditions.
  • Provides an efficient, low cost drainage plane to horizontal roof decks.
  • Geotextile filter fabrics prevent soil particles entering drainage core.
  • Rot proof.
  • Easy installation.
  • Provides both water discharge and retention functions for low and regular maintenance green roofs.

General information

Finish

-

Manufacturer guidance

A variety of surface finishes can be laid directly on top of HYDRODUCT® drainage sheets, dependent on deck use. Contact GCP Technical Services for further guidance.

Material

Polystyrene

Length

20000 mm

32000 mm

Uniclass

Pr_25_57_51_38 High-impact polystyrene (HIPS) studded sheetsPrimary

CAWS

Q37/350 Drainage layer

Q37/355 Combined layers

Specification data - High-impact polystyrene (HIPS) studded sheets

Filter layer

Polypropylene.

Sheet thickness

12 mm.

Weight (minimum)

41 kg.

Typical compressive strength

700 kN/m².

Purpose

Drainage layer.

Tensile strength (minimum)

MD, >7 kN/m / CMD, >7 kN/m.

Form

Non-woven.

Width (minimum)

1.25 m.

Roll length (minimum)

20 m.

Materials

Polystyrene.

BIM objects

BIM object icon

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
IFC
-

1

Revit
-

1

Similar products from GCP Applied Technologies

HYDRODUCT® 200

HYDRODUCT® 200

HYDRODUCT® 220

HYDRODUCT® 220