Hydroduct® 401/ 501

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Polypropylene non-woven filter fabric on one face of an 12 mm studded drainage core with a separation geotextile bonded to the other face. For low and regular maintenance green roofs and planter boxes with minimum falls of 1 in 80.

 

Features and benefits:

 

  • Polystyrene has minimal creep under long term loading.
  • Fully compatible with GCP waterproof membranes.
  • Provides additional factors of safety against water penetration through roof decks.
  • Range of filter fabrics to cover hard and soft landscaped finishes.
  • Range of compressive strength cores to suit different loading and trafficking conditions.
  • Provides an efficient, low cost drainage plane to horizontal roof decks.
  • Geotextile filter fabrics prevent soil particles entering drainage core.
  • Rot proof.
  • Easy installation.
  • Provides both water discharge and retention functions for low and regular maintenance green roofs.
Platform Compatible Version Certified to
IFC IFC - 1 2.1
Revit Revit - 1 2.1

  • Properties and values
  • More BIM objects

Properties and values

COBie
BOS_General
NBS_Data
Applications
Horizontal roofs and decks
CompressiveStrength
700 kN/m²
DrainageFlowAt2%Gradient
0.68 under load of 20 kN/m²
Durability
To be covered within 30 days, predicted to be durable for a minimum of 25 years in natural soils with 4 < pH > 9 and soils temperatures < 25°C
DynamicPerforationResistance
> 26 mm
Form
Filter fabric
Limitations
Do not apply hot asphalt/bitumen to HYDRODUCT® products, not suitable for use with rubber or plastic paving slab supports, at temperatures below 0°C, additional fixings are necessary to secure the geotextile to the drainage core. Contact GCP for further details
PerformanceTensileStrengthMinimum
MD: > 7 kN/m CMD: > 7 kN/m
PhysicalPropertiesDimensionsRollLengthMinimum
20 m
PhysicalPropertiesDimensionsThicknessMinimum
12 mm
PhysicalPropertiesDimensionsWidthMinimum
1.25 m
PhysicalPropertiesWeightMinimum
n/a
RollSize
1.25 m x 20 m long roll x 12 mm thick (40 sq m)
RootInhibitor
n/a
ThirdPartyCertification
EN 13252:2000 + A1:2005
Pset_CoveringCommon

More BIM objects