Select regional version:
The object content is configured for use in UK, but it may also be suitable for use in other locations.
Aritco 9000 - As with a conventional lift, the 9000 cabin lift operates by a single touch, rather than the constant pressure required, for an open platform lift. Enclosing the cabin on all sides creates an improved sense of security and comfort, which when added to the class leading benefits of a pit depth of only 75 mm and a requirement of just 2400 mm headroom, create a compelling package of desirability and affordability.
So closely aligned to a conventional lift, and yet there is no comparison; working out at around 60% of the typical installation cost. The 9000 is the ideal for spaces such as residences and commercial buildings, as well as within people’s homes.
| Platform | Compatible | Version | Certified to |
|---|---|---|---|
IFC
|
2X3 | 3 | 1.3 |
Revit
|
2016 + | 4 | 2.0 |
| Accessories |
|
Cabin ceiling light |
| Capacity |
|
400 kg |
| CarrierControlFeaturesFinish |
|
Natural anodised aluminim with coloured text |
| CarrierControlFeaturesFormat |
|
Illuminated automatic one touch push buttons, emergency stop button, overload indicator and alarm button with siren, optional braille buttons |
| CarrierControlFeaturesMaterial |
|
Aluminium face plate |
| CarrierFinish |
|
As standard: Black embossed dots on COP wall, white grey for other sides (alternative colours, finishes and mirrors optional) |
| CarrierFloorCovering |
|
n/a |
| CarrierFloorCoveringOptions |
|
Choice of 8 Vinyl or Rubber floorings |
| CarrierFormat |
|
Full height |
| CarrierHandRailsFinish |
|
n/a |
| CarrierHandRailsFormat |
|
Staight |
| CarrierHandRailsLocation |
|
On long side under COP (additional handrails available) |
| CarrierHandRailsMaterial |
|
As standard: Stainless steel |
| CarrierMaterial |
|
Aluminium uprights with wooden panels |
| CarrierRailMaterialOptions |
|
Oak, Stainless steel |
| CarrierRailOptions |
|
Bump rails, hand rails |
| Certification |
|
CE Marked in accordance with the Revised Machinery Directive (2006/42/EC) and prEN81-41 |
| DoorsArrangement |
|
Right adjacent |
| DoorsClearOpeningWidthMinimum |
|
900 mm |
| DoorsFireRating |
|
n/a |
| DoorsFrameFinish |
|
Powder coated |
| DoorsFrameMaterial |
|
Integral to shaft enclosure |
| DoorsInfill |
|
GL (Glazed door as standard) |
| DoorsInfillFinish |
|
Powder coated |
| DoorsOperation |
|
Landing: Swing door with closer, Car door: Folding busmatic doors |
| DriveType |
|
Stationary screw and rotating nut |
| DutyCycle |
|
20 (maximum) |
| ElectricalSupply |
|
230 V, 1 phase, 20 A, 50 HZ |
| EnclosureFireRating |
|
n/a |
| EnclosureFormat |
|
Floor fixings and mast support in any direction. |
| EnclosureFrameFinish |
|
Powder coated |
| EnclosureFrameMaterialComposition |
|
Galvanized low carbon steel and aluminium , Low carbon steel |
| EnclosureInfill |
|
White vinyl coated double skinned steel panels filled with mineral wool |
| EnclosureInfillFinish |
|
n/a |
| EnclosureInfillOptions |
|
White vinyl coated double skinned steel panels filled with mineral wool, toughened and laminated glass panels |
| Environment |
|
Indoor |
| LandingControlsCallStations |
|
One touch buttons |
| LandingControlsFeatures |
|
Flush call buttons, Lockable isolator within 2 metres and in view of electrical cabinet located at the upper landing, Battery back up |
| MachineRoom |
|
Integral to enclosure |
| Motor |
|
3 kW, 400 V, 3 phase, 50 Hz, 18-4.7 A |
| NumberOfStopsMaximum |
|
6 |
| OverallDimensionsDepthMaximum |
|
1465 mm |
| OverallDimensionsWidthMaximum |
|
1630 mm |
| PlatformSizeOptions |
|
1000 x 1400 mm, 1100 x 1400 mm |
| Ramp |
|
75 mm pit, no ramp required |
| RatedSpeed |
|
0.15 m/s |
| SafeWorkingLoadMinimum |
|
400 kg |
| TravelHeightRange |
|
2100-13000 mm |
| UserGroup |
|
Ambulant and wheelchair users |
Object upgraded to NBS BIM Object Standard v2.0. |
