NBS Source
I'm a manufacturer

StressPly® Signature Bitumen Flat Roof

Verified by manufacturer 5 months ago

Garland UK Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

Superior modified bitumen membrane.

Jump to:
+44 (0)1174 401050 Website

Application

StressPly Signature is suitable for the most demanding of environments. Suitable for use as a multi-ply modified bituminous waterproofing system for flat roof installation.

Description

StressPly Signature is a superior modified bitumen membrane. Formulated with a high percentage of SBS modifiers, StressPly Signature allows for easy application due to its low-melt properties and extreme cold bending flexibility, down to temperatures as low as -30°C.


Features and benefits:

  • 30 year single-point guarantee.
  • Superior tensile strength up to 1200 N/50 mm.
  • Composite polyester and fibreglass reinforcement.
  • Premium thickness membrane for ultimate protection.


System includes:

  • StressPly Signature (cap sheet)
  • Torch Flex Vapour Barrier
  • SA Flex Vapour control layer (VCL)
  • Torch Flex Ultra Vent
  • Insul Bond
  • Insul Loc
  • Insul Pro
  • Xtratherm-FRBGM
  • tapered-roof-TR-MG
  • Garla-Prime
  • Quick-Prime

General information

Color

Black

Other

Manufacturer guidance

As per manufacturer and includes charcoal.

Finish

Textured

Manufacturer guidance

As per manufacturer and includes mineral slate.

Material

Bitumen

Length

5000 mm

Width

1000 mm

Warranty description

30 year

Uniclass

Ss_30_40_30_72 Reinforced bitumen membrane warm roof covering systemsPrimary

CAWS

J41/110 Built-up reinforced bitumen membrane warm deck roof covering

J41/400 Built-up reinforced bitumen waterproof covering

J41/10 Reinforced bitumen membrane warm deck roof covering

Specification data - Reinforced bitumen membrane warm roof covering systems

Preparation

-

Horizontal work

Garla-Prime.

Quick-Prime.

Skirtings and vertical work

Garla-Prime.

Quick-Prime.

Air and vapour control layer

-

Type

SA Flex VCL 3 mm x 10 x 1 m.

Guidance for specification option:

  • Reinforcement type: High strength fibreglass.
  • Compound type: Bitumen modified with thermoplastic rubber (SBS).
  • Surface finishing: Upper side: Polypropylene textured film. Lower side: Silicone release film with self-adhesive elastomeric compound.

Torch Flex Vapour Barrier.

Guidance for specification option:

  • Reinforcement type: Reinforced and stabilised non-woven polyester mat.
  • Compound type: Bitumen modified with thermoplastic rubber (SBS).
  • Surface finishing: Upper side: Textured polypropylene film.
  • Lower side: PE film.

Attachment

For lower side finishing with polymeric films: Propane-gas light flame.

Guidance for specification option:

Torch Flex Vapour Barrier.

Silicone release film with self-adhesive elastomeric compound.

Guidance for specification option:

SA Flex Vapour Barrier.

Insulation

-

Type

Xtratherm TR/MG Tapered Roof Board A60, 1200 x 1200 mm.

Guidance for specification option:

30-50 mm.

Xtratherm TR/MG Tapered Roof Board B60, 1200 x 1200 mm..

Guidance for specification option:

50-70 mm.

Xtratherm TR/MG Tapered Roof Board C60, 1200 x 1200 mm.

Guidance for specification option:

70-90 mm.

Xtratherm TR/MG Tapered Roof Board D60, 1200 x 1200 mm.

Guidance for specification option:

90-110 mm.

Flat RoofBoard FR/BGM, 1200 x 600 mm.

Guidance for specification option:

Available in the following thicknesses: 25, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140 mm. Insert requirements.

Fixing

The specification for fixing Xtratherm roof boards will vary with the location, roof height/width and topographical data.

Waterproof covering

-

First layer

-

Type

Torch Flex Ultra-Vent 3.5 mm x 8 x 1 m.

Guidance for specification option:

  • Reinforcement type: Reinforced and stabilized non-woven polyester mat.
  • Compound type: Bitumen modified with thermoplastic rubber (SBS).
  • Surface finishing: Upper side: PE film.
  • Lower side: PE film.

Attachment

For lower side finishing with polymeric films: Propane-gas light flame.

Top layer

-

Type

StressPly Signature, 5.5 mm x 5 x 1 m.

Guidance for specification option:

  • Reinforcement type: Composite polyester/fibreglass mat.
  • Compound type: Bitumen modified with thermoplastic rubber (SBS).
  • Surface finishing: Upper side: Coloured slate. Lower side: Polyethylene film.

Attachment

Propane-gas light flame.

Colour

Charcoal.

Dimensions

5000 x 1000 mm.

Guidance for specification option:

Length x width.

Finish

Mineral slate.

BIM objects

Platform Compatible Version
Revit
-

1

Third party certifications

BBA Agrément Certificate

BBA Agrément Certificate

StressPly Signature BBA Certificate: 22/6245

Literature

StressPly Signature Modified Bitumen Waterproofing Membrane - Garland

StressPly Signature Modified Bitumen Waterproofing Membrane - Garland

Garland - High Performance Waterproofing Solutions for Modified Bitumen, Cold Applied Liquid Coatings, Maintenance Products and Metal Cladding & Standing Seam

Garland - High Performance Waterproofing Solutions for Modified Bitumen, Cold Applied Liquid Coatings, Maintenance Products and Metal Cladding & Standing Seam

Garland UK - Green Shield Extensive Green Roofing Systems

Garland UK - Green Shield Extensive Green Roofing Systems

Garland UK - Solarise Photovoltaic PV solar energy systems

Garland UK - Solarise Photovoltaic PV solar energy systems

Case studies

Alderley Park, Science and Innovation hub

Alderley Park, Science and Innovation hub

Similar products from Garland UK

StressPly® Evolution Bitumen Flat Roof

StressPly® Evolution Bitumen Flat Roof

StressPly® Flex Bitumen Flat Roof

StressPly® Flex Bitumen Flat Roof

StressPly® Flex Plus Bitumen System

StressPly® Flex Plus Bitumen System

StressPly® SA Flex Bitumen Flat Roof

StressPly® SA Flex Bitumen Flat Roof