NBS Source
I'm a manufacturer

StressPly® SA Flex Bitumen Flat Roof

Verified by manufacturer 5 months ago

Garland UK Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

Superior self adhesive modified bitumen membrane.

Jump to:
+44 (0)1174 401050 Website

Application

Suitable for warm and cold roof systems.

Description

Combining the use of self-adhesive membranes, hot air welding and solvent-free adhesives, Stress Ply Flex SA System is a flame-free modified bitumen system.


The system features the same durability and robust waterproofing benefits as multi-ply torch-on bitumen membranes, without the need for naked flame.


The membrane laps feature a self-adhesive compound technology, allowing laps to be partially sealed without the need for flame and does not risk burning heat-sensitive insulation board or combustible deck materials during the hot-air welding process.


Features and benefits:

  • 20 year single-point guarantee.
  • European fire safety standard using CEN/TS 1187 Test 4.
  • NFRC Safe2Torch compliant.
  • Classified to EN 13501-5 with a result of Broof(t4).
  • Compliant with Building Regulation and Approved Document B.


System includes:

  • StressPly SA Flex (cap sheet)
  • SA Base
  • SA Flex VCL
  • SA Contact Primer
  • Insul Bond
  • Insul Loc
  • Insul Pro
  • Xtratherm-FRBGM
  • Tapered-roof-TR-MG

General information

Finish

Textured

Guidance for specification option:

Slate granules.

Material

Bitumen

Length

10000 mm

Width

1000 mm

Warranty description

25 year

Uniclass

Ss_30_40_30_72 Reinforced bitumen membrane warm roof covering systemsPrimary

CAWS

J41/110 Built-up reinforced bitumen membrane warm deck roof covering

J41/400 Built-up reinforced bitumen waterproof covering

J41/10 Reinforced bitumen membrane warm deck roof covering

Specification data - Reinforced bitumen membrane warm roof covering systems

Preparation

-

Horizontal work

SA Contact Primer.

Skirtings and vertical work

SA Contact Primer.

Air and vapour control layer

-

Type

SA Flex VCL 3 mm x 10 x 1 m.

Guidance for specification option:

  • Reinforcement type: High strength fibreglass.
  • Compound type: Bitumen modified with thermoplastic rubber (SBS).
  • Surface finishing: Upper side: Polypropylene textured film. Lower side: Silicone release film with self-adhesive elastomeric compound.

Attachment

Silicone release film with self-adhesive elastomeric compound.

Guidance for specification option:

SA Flex Vapour Barrier

Insulation

-

Type

Xtratherm TR/MG Tapered Roof Board A60, 1200 x 1200 mm.

Guidance for specification option:

30-50 mm.

Xtratherm TR/MG Tapered Roof Board B60, 1200 x 1200 mm..

Guidance for specification option:

50-70 mm.

Xtratherm TR/MG Tapered Roof Board C60, 1200 x 1200 mm.

Guidance for specification option:

70-90 mm.

Xtratherm TR/MG Tapered Roof Board D60, 1200 x 1200 mm.

Guidance for specification option:

90-110 mm.

Flat RoofBoard FR/BGM, 1200 x 600 mm.

Guidance for specification option:

Available in the following thicknesses: 25, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140 mm. Insert requirements.

Fixing

The specification for fixing Xtratherm roof boards will vary with the location, roof height/width and topographical data.

Waterproof covering

-

First layer

-

Type

SA Flex Base Sheet 3 mm x 10 x 1 m.

Guidance for specification option:

  • Reinforcement type: Non-woven polyester reinforcement, reinforced with fibre glass filaments (composite).
  • Compound type: Bitumen modified with thermoplastic rubber (SBS).
  • Surface finishing: Upper side: Polypropylene film. Lower side: Silicone release film.

Attachment

Silicone release film with self-adhesive elastomeric compound.

Top layer

-

Type

StressPly Flex SA, 4.2 mm x 10 x 1 m.

Guidance for specification option:

  • Reinforcement type: Reinforced and stabilized non-woven polyester mat.
  • Compound type: Bitumen modified with thermoplastic rubber (SBS).
  • Surface finishing: Upper side: coloured slate granules. Lower side: Silicone release film.

Attachment

Silicone release film with self-adhesive elastomeric compound.

BIM objects

Platform Compatible Version
Revit
-

1

Third party certifications

BBA Agrément Certificate

BBA Agrément Certificate

StressPly Flex SA BBA Certificate: 22/6553

Literature

Garland - High Performance Waterproofing Solutions for Modified Bitumen, Cold Applied Liquid Coatings, Maintenance Products and Metal Cladding & Standing Seam

Garland - High Performance Waterproofing Solutions for Modified Bitumen, Cold Applied Liquid Coatings, Maintenance Products and Metal Cladding & Standing Seam

Garland UK - Green Shield Extensive Green Roofing Systems

Garland UK - Green Shield Extensive Green Roofing Systems

Garland UK - Solarise Photovoltaic PV solar energy systems

Garland UK - Solarise Photovoltaic PV solar energy systems

Similar products from Garland UK

StressPly® Evolution Bitumen Flat Roof

StressPly® Evolution Bitumen Flat Roof

StressPly® Flex Bitumen Flat Roof

StressPly® Flex Bitumen Flat Roof

StressPly® Flex Plus Bitumen System

StressPly® Flex Plus Bitumen System

StressPly® Signature Bitumen Flat Roof

StressPly® Signature Bitumen Flat Roof