Terra Sliding Cantilevered Gate

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Terra Sliding Cantilevered Gate object. The object has a number of parametric values for gate height, widths (up to 10 m), accessories, infill, finishes, colour, controls and safety devices to ensure the automatic equipment to complies to BS EN 12453. Bespoke fully welded construction of rectangular hollow section gate, low carbon steel to BS4848 pt2.

The PAS 68 impact tested HVM Sliding cantilevered gate which has been impact tested with a 7.5 t vehicle at 50 mph (80 kph) which requires no ground track across the roadway. The balance is provided by a unique runback track, which enables the gate to be fully projected across the roadway without tipping. Runback required for gate equals Aperture x 1.5. 100% operating duty cycle designed for continuous and frequent use.

Manufactured to suit unique site requirements whilst ensuring compliance to PAS 68 impact test report data and programmed to unique control specifications.

Platform Compatible Version Certified to
IFC IFC 2X3 1 1.3
Revit Revit 2016 + 2 2.0

  • Properties and values
  • More information
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
Accessories
High Security Cabinet, Anti-tamper alarms, 100/200 mm traffic light system, flashing beacon, audible alarm
BarrierDimensionSpan
8000 mm (maximum)
BarriersMaterial
Steel sections
BarriersType
Fully welded vertical bar and high security 358 welded mesh infill
Certification
SBD, IWA 14 up to 8000 mm span, PSSA Verification Scheme, BRE Global
ColourOptions
Any colour in RAL range
ElectricalSupply
20 A, 400 V, three phase, 5 wire, neutral, earth
EmbedmentDepth
350 mm
FinishOptions
Shotblasted, hot zinc sprayed, primed and finished with a final coat of polyurethane paint
Format
Cantilevered, sliding
FoundationSize
Foundation type B, Gate base: 2000 x 1600 x 350 mm, Receptor post: 2000 x 1600 x 350 mm
GateLeavesOptions
Range of infill options available
HeightOptions
Standard 2400 mm, Maximum: 3000 mm, Minimum: 1200 mm
ImpactSpecification
7.2 t at 64 kph (40 mph)
ManualOverride
true
MethodOfOperation
Programmable logic controller, push button supplied as standard
MotorRating
100% duty rating
OperationOptions
UPS (Uninterrupted Power Supply), EFO (Extra Fast Operation), Can be interfaced to any access control system
OperationSpeed
250 mm/s, EFO: 600 mm/s, depending on configuration
Posts
Heavy gate base and receptor post
SafetyOptions
Safety-edges, vehicle detector loops, safety photocells
Uses
High security, anti-terrorist, government, military, airports
Pset_DoorCommon
Pset_ElectricalDeviceCommon

More information

More BIM objects

What's Changed?

7/9/2018

Object upgraded to NBS BIM Object Standard v2.0.