Flowseal ESD UV

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

A high-grade, electrostatic dissipating, hard-wearing polyurethane floor coating designed for maximum chemical resistance which is light-fast and flexible.

Flowseal ESD UV Coloured is ideal where a seamless satin finish is required in such environments as electronics, pharmaceutical, medical and veterinary practices, laboratories, chemical plants and all areas where a long-lasting, easily cleaned, high chemical resistance electrostatic dissipating finish is essential.

  • Antistatic
  • Chemical Resistant
  • Slip Resistant
  • Temperature Resistant
  • UV Resistant
  • EN 61340
  • Hard wearing
  • Hygienic
  • Seamless
Platform Compatible Version Certified to
IFC IFC 2X3 1 1.3
Revit Revit 2016 + 2 2.0

  • Properties and values
  • More BIM objects
  • What's Changed?

Properties and values

IFC
IfcExportAs
IfcCoveringType
IfcExportType
FLOORING
COBie
NBS_General
NBS_Data
AbrasionResistance
79 mg loss (abrasion) to ASTM D4060
Application
Roller
BondStrength
Greater than cohensive strength of 25 N/mm² concrete, >1.5 MPa
Certification
EN IEC 61340-5-1
CoefficientOfThermalExpansion
7.5 x 10^(-5) mm/mm°C
ColourOptions
Dark Green, Tile Red 637, Light Blue (RAL 5012), Signal Grey (RAL 7004)
ConductiveGrid
Conductive Grid applied beneath topping: ESD Copper Tape 6-9 mm wide
ConductiveGridPrimer
Flowprime ESD Conductive
CureTime
Light traffic: 24 hours, full traffic: 2 days, full chemical cure: 7 days
Density
1.55 kg/L
ElectricalResistance
5 x 10^4 -1 x 10^9 Ω
FlexuralStrength
n/a
ImpactResistance
n/a
LevellingScreed
If required
MovementJointsAttachment
n/a
MovementJointsType
n/a
Primer
Flowprime or Peran LVS
Reinforcement
n/a
ResinFlooring
Flowseal ESD UV (FeRFA Type 3)
ResinSkirtingsAndUpstands
Flowtex F1 mortar
SlipResistance
Dry >40 low slip potential
SubstratePreparation
Shot blast
SubstrateTesting
Moisture content of substrates dry to 75% RH
SurfaceHardness
50 Shore D
SurfaceTreatment
n/a
SystemAccessories
n/a
TemperatureResistance
Spillages: 90°C, Sustained heat: 60°C
TensileStrength
n/a
Uses
Electronics, pharmaceuticals, medical and veterinary practices, laboratories, chemical plants and areas where a durable electrostatic dissipating finish is required
VapourPermeability
2.38 g/m²/mm/24 hours
WaterPermeability
Nil- Karsten test (impermeable)
Pset_CoveringCommon
Pset_CoveringFlooring

More BIM objects

What's Changed?

7/5/2018

Object upgraded to NBS BIM Object Standard v2.0.