Flowfresh RT System

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Flowfresh RT is an easily applied 6 – 9 mm heavy duty, chemical resistant antimicrobial treated polyurethane resin floor screed. Attractive fine textured coloured floor finish with a speckled effect on the surface.

Ideal for wet processing zones such as food manufacturing, food preparation areas, and chemical processing plants.Contains Polygiene, an antimicrobial additive based on silver ion technology.

  • Ease of application, rake and trowel
  • Very high chemical resistance
  • Easy to clean and sterilise anti-slip surface, minimal joints
  • Heat resistant to 120°C
  • Steam cleanable
  • Non tainting, non dusting
  • High abrasion resistance
  • Withstands high mechanical stress
  • Good alternative to expensive acid resistant tiles
  • Low odour during application
  • Positive slip resistance  
Platform Compatible Version Certified to
IFC IFC - 1 1.3
Revit Revit 2016 + 2 2.0

  • Properties and values
  • More information
  • More BIM objects
  • What's Changed?

Properties and values

IFC
IfcExportAs
IfcCoveringType
IfcExportType
FLOORING
COBie
NBS_General
NBS_Data
Application
Rake and trowel
BarcolHardness
n/a
BondStrength
>2.5 N/mm²
Certification
CE Marked
CoefficientOfThermalExpansion
3.74 x 10^(-5) mm/mm°C
ColourOptions
Ochre, Cream, Mustard, Red, Dark Green, Mid Grey, Gentian Blue, Dark Grey
CompressiveStrength
>50 N/mm²
CureTime
Light traffic: 24 hours, full traffic: 2 days, full chemical cure: 7 days
Density
n/a
ElongationAtBreak
n/a
FinishOptions
n/a
FlexuralStrength
20 N/mm²
Grout
n/a
ImpactResistance
21 Nm
LevellingScreed
Isopol SBR if required
Membrane
n/a
ModulusOfElasticity
n/a
MovementJointsAttachment
n/a
MovementJointsType
n/a
Primer
Flowprime or Hydraseal DPM (where DPM required), or Flowfresh Primer (high heat required)
Reinforcement
n/a
ResinFlooring
Flowfresh RT (FeRFA Type 8)
ResinSkirtingsAndUpstands
n/a
SlipResistance
Dry >40 low slip potential
SubstratePreparation
shotblast
SubstrateTesting
Moisture content of substrates dry to 75% RH
SurfaceHardness
n/a
SurfaceTreatment
1-2 mm Silica sand scatter
SystemAccessories
n/a
TemperatureResistance
Spillages: <120°c, sustained="" dry="" temperature:="" -40="" to="" 105°c="" (at="" 9="" mm="">
TensileStrength
10 N/mm²
ThermalConductivity
n/a
ThicknessOptions
6 mm, 9 mm
Toxicity
n/a
Uses
Wet processing zones, food manufacturing or preparation areas, chemical processing plants
VapourPermeability
3 g/m²/mm/24 hours
WaterPermeability
Nil- Karsten test (impermeable)
WearResistance
<1>
Pset_CoveringCommon
Pset_CoveringFlooring

More information

  • NBS specification data
    Case studies and technical literature
  • More BIM objects

    What's Changed?

    7/5/2018

    Object upgraded to NBS BIM Object Standard v2.0.