Flowfresh HF LT System

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Flowfresh HF/LT is a 6 – 9 mm heavy duty, chemical resistant antimicrobial treated polyurethane resin floor screed. Attractive fine textured coloured floor finish with a speckled effect on the surface.

Ideal for wet processing zones such as food manufacturing, food preparation areas, and chemical processing plants. Contains Polygiene, an antimicrobial additive based on silver ion technology.

  • Very high chemical resistance
  • Easy to clean and sterilise anti-slip surface, minimal joints
  • Heat resistant to 120°C
  • Resistant to steam cleaning or constant hot water
  • Non tainting, non dusting
  • High abrasion resistance
  • Withstands high mechanical stress and thermal shock
  • Good alternative to expensive acid resistant tiles
  • Grades available for low odour during application
  • Positive slip resistance
Platform Compatible Version Certified to
IFC IFC - 1 1.3
Revit Revit 2016 + 2 2.0

  • Properties and values
  • More BIM objects
  • What's Changed?

Properties and values

IFC
IfcExportAs
IfcCoveringType
IfcExportType
FLOORING
COBie
NBS_General
NBS_Data
Application
n/a
BarcolHardness
n/a
BondStrength
>2.5 N/mm²
Certification
CE Marked
CoefficientOfThermalExpansion
3.74 x 10^(-5) mm/mm°C
ColourOptions
Ochre, Cream, Mustard, Red, Dark Green, Mid Grey, Gentian Blue, Dark Grey
CompressiveStrength
>50 N/mm²
CureTime
Light traffic: 24 hours, full traffic: 2 days, full chemical cure: 7 days
Density
n/a
ElongationAtBreak
n/a
FinishOptions
n/a
FlexuralStrength
20 N/mm²
Grout
n/a
ImpactResistance
20 Nm
LevellingScreed
Isopol SBR if required
Membrane
n/a
ModulusOfElasticity
n/a
MovementJointsAttachment
n/a
MovementJointsType
n/a
Primer
Flowprime or Hydraseal DPM (where DPM required), or Flowfresh Primer (high heat required) with 1-2 mm silica sand scatter
Reinforcement
n/a
ResinFlooring
Flowfresh HF (FeRFA Type 8)
ResinSkirtingsAndUpstands
n/a
SlipResistance
Dry >40 low slip potential
SubstratePreparation
shotblast
SubstrateTesting
Moisture content of substrates dry to 75% RH
SurfaceHardness
n/a
SurfaceTreatment
n/a
SystemAccessories
n/a
TemperatureResistance
Spillages: <120°c, sustained="" dry="" temperature:="" -40="" to="" 105°c="" (at="" 9="" mm="">
TensileStrength
10 N/mm²
ThermalConductivity
n/a
ThicknessOptions
6 mm, 9 mm
Toxicity
n/a
Uses
Wet processing zones, food preparation areas, chemical processing plants
VapourPermeability
3 g/m²/mm/24 hours at 9 mm thickness
WaterPermeability
Nil- Karsten test (impermeable)
WearResistance
<1>
Pset_CoveringCommon
Pset_CoveringFlooring

More BIM objects

What's Changed?

7/5/2018

Object upgraded to NBS BIM Object Standard v2.0.